Honghai 2CY Series Gear Pump
2CY series gear pump is applicable to transport not containing solid particles and fibers, non-corrosive, temperature is not higher than 80º C, the viscosity for 5 X 10-6 ~ 1.5 X 10-3 m2 / s (5-1500 CST) lubricating oil or other similar properties of lubricating oil liquid.
Brief introduction
This Honghai 2CY series of gear pumps are mainly consisted of gear, shaft, pump body, pump cover, bearings, shaft seals and other related components. The gear after nitrogen treatment had higher hardness and wear resistance. Together with the shaft installed in the sleeve can be replaced within the operation.
All parts of the lubrication pump were used in the pump work automatically achieve the conveying medium.
Pump shaft within four in the pump floating installation, automatically adjust the gap size with work pressure, so the stable pressure pump, the output flow pulsation is small, soluble product and high efficiency.
From the pump shaft to view, it's rotating clockwise.
With the certification of ISO and SGS
Application
In the oil system, Honghai 2CY Series Gear Pump can be used for transmission, booster pump;
In the fuel oil system, it can be used as a transport, pressure, jet fuel pump;
In the hydraulic drive system, it can be used to provide hydraulic power of hydraulic pump;
In all industrial fields, it can be used as lubricating oil pump.
Feature
Flow rate: 18.3~2500 l/min Suction distance: 5 m Outlet diameter: 3/4"- 8 " Outlet pressure: 0.28 - 1.45 MPA Motor power: 1.5 KW-75 KW
Technical Data
Feel free to contact Honghai Pump Co., Ltd.
Send product request
Other supplier products
 |
Honghai Thermal oil pump | Brief Introduction This series of thermal oil pump is produced on the basis of air-cooled hot oil pump, which is able to resist higher temperature.... |
 |
ZYB Series Booster Fuel Pump | ZYB Series Booster Fuel Pump Advanced structure small volume big capacity low noise long service life Honghai ZYB series booster fuel gear pump is... |
 |
KCB External Gear Pump | Honghai KCB External Gear Pump This Series of external gear pump, is mainly consists of gear, eccentric shaft, pump body, safe valve and sealing. ... |
 |
Horizontal centrifugal pump | Horizontal centrifugal pump 2.good performance 3.reliable operation 4.high-temperature 5.small volume,save cost Applications 2.Chemical Industr... |
 |
Gear lobe pump | Gear lobe pump Advanced structure small volume big capacity low noise long service life Brief Introduction Honghai NCB series rotor pump adapts wi... |
Same products
 |
Gr400 Pneumatic Conveying Equipment/Pneumatic High Pressure Conveying Equipment | Seller: Greentech International (Zhangqiu) Co., Ltd | Cast Iron Blow Through Airlock Valve Positive Rotary FeederRotary airlocks displace bulk solids f... |
 |
Slurry Pump Impeller | Seller: Shijiazhuang Industrial Pump Factory Co., Ltd. | Ais a rotating component of athat accelerates fluid outward from the center of rotation, thus tra... |
 |
Vertical foam pump Warman foam pump | Seller: Sunbo Machinery | The SF foam pump is robustly constructed, designed for continuous pumping of highly abrasive and ... |
 |
Horizontal Froth Pump Warman | Seller: Sunbo Machinery | The SAHF Horizontal Froth Slurry Pumpis pumping slurry with obstinate froth, which is equivalent ... |
 |
SPR Vertical Slurry Pump Parts Casing Impeller FPL | Seller: Sunbo Machinery | The SV(R) series Vertival slurry pumpparts is equivalent to warman SP slurry pump parts, which is... |
