Honghai 2CY Series Gear Pump
2CY series gear pump is applicable to transport not containing solid particles and fibers, non-corrosive, temperature is not higher than 80º C, the viscosity for 5 X 10-6 ~ 1.5 X 10-3 m2 / s (5-1500 CST) lubricating oil or other similar properties of lubricating oil liquid.
Brief introduction
This Honghai 2CY series of gear pumps are mainly consisted of gear, shaft, pump body, pump cover, bearings, shaft seals and other related components. The gear after nitrogen treatment had higher hardness and wear resistance. Together with the shaft installed in the sleeve can be replaced within the operation.
All parts of the lubrication pump were used in the pump work automatically achieve the conveying medium.
Pump shaft within four in the pump floating installation, automatically adjust the gap size with work pressure, so the stable pressure pump, the output flow pulsation is small, soluble product and high efficiency.
From the pump shaft to view, it's rotating clockwise.
With the certification of ISO and SGS
Application
In the oil system, Honghai 2CY Series Gear Pump can be used for transmission, booster pump;
In the fuel oil system, it can be used as a transport, pressure, jet fuel pump;
In the hydraulic drive system, it can be used to provide hydraulic power of hydraulic pump;
In all industrial fields, it can be used as lubricating oil pump.
Feature
Flow rate: 18.3~2500 l/min Suction distance: 5 m Outlet diameter: 3/4"- 8 " Outlet pressure: 0.28 - 1.45 MPA Motor power: 1.5 KW-75 KW
Technical Data
Feel free to contact Honghai Pump Co., Ltd.
在线联系供应商
Other supplier products
 |
KCB External Gear Pump | Honghai KCB External Gear Pump This Series of external gear pump, is mainly consists of gear, eccentric shaft, pump body, safe valve and sealing. ... |
 |
3GCL vertical three screw pump | 1, medium for linear continuous conveying, without stirring, without pulsation. 2, little vibration, low noise. 3, high pressure, high efficiency. ... |
 |
Gear lobe pump | Gear lobe pump Advanced structure small volume big capacity low noise long service life Brief Introduction Honghai NCB series rotor pump adapts wi... |
 |
AY series single two-stage centrifugal oil pump | Honghai AY series single two-stage centrifugal oil pump High Effective Energy Saving AY two-stage centrifugal pump Advanced technology High effici... |
 |
ZYB Series Booster Fuel Pump | ZYB Series Booster Fuel Pump Advanced structure small volume big capacity low noise long service life Honghai ZYB series booster fuel gear pump is... |
Same products
 |
OEM 定制卧式 LB 系列冰箱润滑油齿轮泵 | 卖方: 河北盛辉泵业 | LB 系列冷冻机齿轮泵适用于输送粘度在 200°E （1500mpa.s）以下，无固体颗粒杂质，温度不高于 120° 的各种机械油、透平油及其它性质相近，性能平稳的介质。该设备结... |
 |
OEM 定制卧式 LB 系列冰箱润滑油齿轮泵 | 卖方: 河北盛辉泵业 | LB 系列冷冻机齿轮泵适用于输送粘度在 200°E （1500mpa.s）以下，无固体颗粒杂质，温度不高于 120° 的各种机械油、透平油及其它性质相近，性能平稳的介质。该设备结... |
 |
新款 YHCB 系列可移动卧式圆弧齿轮输油泵 | 卖方: 河北盛辉泵业 | YHCB 系列圆弧齿轮泵专为输送高粘度流体（如油、树脂和化学溶液）而设计。这些泵广泛应用于需要精确可靠地处理流体的行业，包括石化、食品加工和制药行业。它们设计坚固、流量控制精确、易于维护，是需要... |
 |
便携式WCB系列不锈钢高粘度柴油齿轮输送泵 | 卖方: 河北盛辉泵业 | WCB齿轮油泵重量轻，体积小，携带移动方便。结构采用联轴器与介质隔离，联轴器单独润滑，齿轮采用合金钢，采用特殊的热加工工艺，表面硬度可达HRC60以上，耐磨性强，使用寿命长。与其它普通型泵相比，... |
 |
库存 ZYB 系列不锈钢废重油输送高压齿轮泵 | 卖方: 河北盛辉泵业 | ZYB系列废油泵用于抽送温度不高于200℃，粘度不大于150mm2/S含有非金属杂质的重油、柴油、煤焦油及粮油、化工、建材、日化等产品中的杂质。本机采用自密封润滑设计，间隙自动调整结构，零件采用... |
