Foot Valve
Basic information
This valve is installed at the bottom of the pump's underwater pipette, restricting the return of the liquid to the water source in the pump pipe.
Features
1. Full pipe size flow area;
2. Lowest head loss;
3. 360° stainless steel strainer;
4.The discis completely covered with adhesive and reliable sealing.
2. Lowest head loss;
3. 360° stainless steel strainer;
4.The discis completely covered with adhesive and reliable sealing.
Principle
The water of the water source enters thechina foot valvebody from the cover. Under the pressure of the fluid, the disc opens the water, and when the pressure in the outlet pipe stops, the disc will be closed quickly, and the liquid will not be poured back to the water source, which plays a role of unimpeded pumping and saving water energy loss.
Installation and Commissioning
Installed at the bottom of the pump suction pipe to ensure its vertical status；Start immediately after the water is filled in the forward water pipe for the first time, resulting in a semi-vacuum in the suction pipe and water is sucked into the vertical pipe to complete the water pumping process. For specific use, please consult ZhengFeng Valve Group.
Product scope, Standards & Materials
Size Range: 2"~24"
Pressure Rating: 10bar ~ 25bar
Face to Face Dimensions: AMSE B16.10, EN558-1
Flange End Dimension: AMSE B16.1/16.42, AS4087, EN1092-2
Coating: Fusion Bonded Epoxy Coating
Inspection and Test: ISO 5208 / EN 12226-2
Pressure Rating: 10bar ~ 25bar
Face to Face Dimensions: AMSE B16.10, EN558-1
Flange End Dimension: AMSE B16.1/16.42, AS4087, EN1092-2
Coating: Fusion Bonded Epoxy Coating
Inspection and Test: ISO 5208 / EN 12226-2
|
Part |
Material |
Standard |
|
Body |
Ductile Iron |
EN 1563/DIN 1693 |
|
Flow Deflector |
Ductile Iron |
EN 1563/DIN 1693 |
|
Stem |
Stainless Steel 431 |
EN10088-1/ASTM A959 |
|
Disc |
Ductile Iron + EPDM |
EN 1563/ISO 4633 |
|
Strainer |
Stainless Steel 431 |
EN10088-1/ASTM A959 |
|
Spring |
Stainless Steel 431 |
EN10088-1/ASTM A959 |
|
For the materials options not listed, consult factory. ZhengFeng manufactures valves in more than 50 different alloys. |
||
Product Photo
Send product request
Other supplier products
 |
6 inch Ball Valve | Categories: Ball Valve, Ball Valve By Size Tags: Flanged Ball Valve, Reduced Bore Ball Valve Description Ball 6 inch valvemeans the valve size... |
 |
Bronze Adjustable Dynamic Flow Balancing Valve | ZECO is one of the leading check valve manufacturers china, China. ZECO check valveprovides non-slam closure, have a low head loss and close drip-t... |
 |
6 Inch Ball Valve | Description of 6 Inch Ball Valve: ZECO Valve Group is a well-known ball valve manufacturer in China.Since its establishment in 1991, it has been p... |
 |
Flange Globe Valve | Description of Flange Globe Valve: ZECO forged globe valvescan be divided according to the location of the stem thread. Flange globe stop valveste... |
 |
Pressure Reducing Valve | It adjusts and controls the outlet pressure of the main valve to enable the outlet pressure of the main valve not vary with inlet pressure, enable ... |
Same products
 |
Class 300 Valve | Seller: GangYe Group Co.,Ltd. | Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing... |
 |
Class 3000 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-... |
 |
Class 2500 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ... |
 |
Class 150 Valve | Seller: GangYe Group Co.,Ltd. | globe valve class 150is a pressure rating designation defined by standards organizations, such as... |
 |
Class 1500 Industrial Valve | Seller: GangYe Group Co.,Ltd. | A class 1500 valve made of 316 stainless steel, for instance, can sustain 248 bar of pressure at ... |
