Foot Valve
Basic information
This valve is installed at the bottom of the pump's underwater pipette, restricting the return of the liquid to the water source in the pump pipe.
Features
1. Full pipe size flow area;
2. Lowest head loss;
3. 360° stainless steel strainer;
4.The discis completely covered with adhesive and reliable sealing.
2. Lowest head loss;
3. 360° stainless steel strainer;
4.The discis completely covered with adhesive and reliable sealing.
Principle
The water of the water source enters thechina foot valvebody from the cover. Under the pressure of the fluid, the disc opens the water, and when the pressure in the outlet pipe stops, the disc will be closed quickly, and the liquid will not be poured back to the water source, which plays a role of unimpeded pumping and saving water energy loss.
Installation and Commissioning
Installed at the bottom of the pump suction pipe to ensure its vertical status；Start immediately after the water is filled in the forward water pipe for the first time, resulting in a semi-vacuum in the suction pipe and water is sucked into the vertical pipe to complete the water pumping process. For specific use, please consult ZhengFeng Valve Group.
Product scope, Standards & Materials
Size Range: 2"~24"
Pressure Rating: 10bar ~ 25bar
Face to Face Dimensions: AMSE B16.10, EN558-1
Flange End Dimension: AMSE B16.1/16.42, AS4087, EN1092-2
Coating: Fusion Bonded Epoxy Coating
Inspection and Test: ISO 5208 / EN 12226-2
Pressure Rating: 10bar ~ 25bar
Face to Face Dimensions: AMSE B16.10, EN558-1
Flange End Dimension: AMSE B16.1/16.42, AS4087, EN1092-2
Coating: Fusion Bonded Epoxy Coating
Inspection and Test: ISO 5208 / EN 12226-2
|
Part |
Material |
Standard |
|
Body |
Ductile Iron |
EN 1563/DIN 1693 |
|
Flow Deflector |
Ductile Iron |
EN 1563/DIN 1693 |
|
Stem |
Stainless Steel 431 |
EN10088-1/ASTM A959 |
|
Disc |
Ductile Iron + EPDM |
EN 1563/ISO 4633 |
|
Strainer |
Stainless Steel 431 |
EN10088-1/ASTM A959 |
|
Spring |
Stainless Steel 431 |
EN10088-1/ASTM A959 |
|
For the materials options not listed, consult factory. ZhengFeng manufactures valves in more than 50 different alloys. |
||
Product Photo
在线联系供应商
Other supplier products
 |
Backflow Preventers | ZECO Valve Group, founded in 1991 with focus on manufacturing china water valve, including control valves, balancing valves, gate valve, butterfly ... |
 |
Strainer & Dirt Separator | Strainers, dirt separatorsand backflow preventers are designed to prevent impurities from entering the specified pipe section. Comparing these thre... |
|
|
Rising Stem Resilient Gate Valve | The rising stem gate valves produced by ZhengFeng are mainly installed on various pipelines and used as two-way closed-circuit equipment. They are ... |
 |
Wafer Check Valve | What is a Wafer Check Valve? Wafer check valves are in-line piping valves used to control fluid flow direction and reduce or fully prevent possi... |
|
|
Pressure Control Valve | Pressure control valves use the balancing principle of hydraulic pressure and spring force to adjust the pressure of the hydraulic system and contr... |
Same products
 |
Combination angle valve | 卖方: Zhejiang Huaqi Information Technology Co., LTD | Meet our Brass Angle Ball Valve, a versatile and reliable solution for controlling fluid flow in ... |
 |
Multifunctional hydraulic control valve | 卖方: FLUID TECH PIPING SYSTEMS (TIANJIN) CO.,LTD | Features: Size: 2"-24”(DN50-DN600) Material: Ductile iron ASTM A536, 65-45-12 Dimension:... |
 |
Fire Protection Grooved Butterfly Valve | 卖方: FLUID TECH PIPING SYSTEMS (TIANJIN) CO.,LTD | Features: Code：D81X4 Size: 2"-12”(DN50-DN300) Material: Ductile iron ASTM A536, 65-45-12... |
 |
Dry Ash Gate Valve | 卖方: China Valve Industry Co., Ltd. | The dry ash gate valve is designed for both inlet and outlet pipelines. It features... |
 |
China factory High temperature double head bolt 2""-8UN Steam Turbine RSV N for power station | 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China factory High temperature double head bolt 2""-8UN Steam Turbine RSV N for power stationOur... |
