Altitude Control Valve
Features of Altitude Control Valve
Automatic tank fill and shut-off without the use of floats or sensors;
Accurate shut-off to within inches of set point;
High level point adjustable with single screw;
Exhaust-to-atmosphere operation allows minimum pressure loss.
Altitude Control Valve Working Principle
Altitude valvecloses at a preset maximum water level to prevent overflow from an above-ground storage tank or cistern and opens to replenish water when the level of the storage tank or cistern is lowered. Altitude control valve controls the high water level of the reservoir without floats or other devices. It remains fully open until it reaches the closed water level. The valve is designed for one-way flow only. The valve is hydraulically operated with a pilot control. The pilot control operates based on the force difference between the spring load and the water level in the reservoir. The pilot control measures the reservoir head through a customer supplied sensing tube connected directly to the reservoir.
Altitude Control ValveInstallation and Commissioning
In areas where freezing temperatures are possible, the valve should be located in a vault below the frost line. For specific use, please consult Zeco ValveGroup.
Altitude Control Valve Material and Standard
Face to Face Dimensions: AMSE B16.10, EN558-1
Flange End Dimension: AMSE B16.5/16.42, AS4087, EN1092-2
Coating: WRAS approved Fusion Bonded Epoxy Coating
Inspection and Test: ISO 5208 / EN 12226-2
Part |
Material |
Standard |
Body |
Ductile Iron |
EN 1563/DIN 1693 |
Bonnet |
Ductile Iron |
EN 1563/DIN 1693 |
Trim |
Stainless Steel 304 |
EN 10088-1/ASTM A959 |
Seat |
Stainless Steel 304 |
EN 10088-1/ASTM A959 |
Diaphragm |
EPDM / NBR |
ISO 4633 |
Pilot Valve |
Stainless Steel 304 |
EN 10088-1/ASTM A959 |
For materials options not listed, consult factory. Zecomanufactures valves in more than 50 different alloys. |
Want to know altitude valve priceand altitude valve operation, please contact us.
Send product request
Other supplier products
4 Inch Gate Valve | Description of 4 Inch Gate Valve: ZECO 4 flanged gate valveis one of the most commonly used calibers. Gate valve in the line just switch effect, lo... | |
Forged Steel Gate Valve | Categories: Forged Steel Gate Valve, Gate Valve Tag: OS&Y Valve Description ZECO manufacturing capabilities for API 602 Forged Gate valves... | |
Gear Operated Gate Valve | Description of Gear Operated Gate Valve: ZECO gear operated gate valve is defined according to the driving mode. Gear operated gate valve is mainly... | |
Dynamic Balancing Valve | Festures of Dynamic Balancing Valve No external energy is required for automatic flow regulation; Automatically adjust equipment or pipeline flow... | |
6 inch Ball Valve | Categories: Ball Valve, Ball Valve By Size Tags: Flanged Ball Valve, Reduced Bore Ball Valve Description Ball 6 inch valvemeans the valve size... |
Same products
Клапан | Seller: RongTengXinNuo(Tianjin) International Trade Co.,Ltd | Клапан | |
Class 300 Valve | Seller: GangYe Group Co.,Ltd. | Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing... | |
Class 3000 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-... | |
Class 2500 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ... | |
Class 150 Valve | Seller: GangYe Group Co.,Ltd. | globe valve class 150is a pressure rating designation defined by standards organizations, such as... |