.

2inch normally closed solenoid valve replace Dungs valve MB-DLE

Description:

Gas MultiBloc/Functicon Solenoid valve intergradesfilter, regulator, valves and pressure sensor in one compact fitting.

// Filter

// One regulator and two valves: BO1

// One valve is fast opening and one valve is slow opening

// Solenoid valves up to 360mbar as per DIN EN161 Class A Group 2

// Sensitive setting of output pressure by regulator as per DIN EN88 Class A Group 2

// High flow rate at low pressure drop

// DC Solenoid drive interference degree N

// Main Volume/Flow restrictor at V2

// Flange connection with pipe threads as per ISO7/1

// Applicable to gases, such asnaturalgas, methane, LPG and so on

// Blue signal light indicates working status

// Simple mounting, compact and light weight

DEVB-D:

Two solenoid valves, both are fast opening and fast closing with main volume restrictor at V2 to adjust flow rate.

DEVB-DLE:

Two solenoid valves, slow opening and fast closing. Both opening time and main volume can be adjusted at V2.

MultiBloc/Function Solenoid Valve

Rp3/4-Rp2

LCV-BD/BDLE 407 -420 B01

Technical Data:

Max Working Pressure:360mbar (36Kpa)

Pressure Outlet Range:S20 Pa: 4mbar to 20mbar

S50 Pa: 20mbar to 50mbar

Valve V1:Fast opening and fast closing solenoid shut-off valve as per DIN EN161 Class A Group 2

Valve V2:Solenoid shut-off valve as per DIN EN161 Class A Group 2

Closing time:<1s

Opening time:LCV-BD

LCV-BDLE = about 15s at +20℃ without initial lift

Initial lift:Adjustable for LCV-BDLE

Main Volume:Adjustable at V2 for both LCV-BD and LCV-BDLE

Pressure regulating unit:Pressure regulator allows a very steady pressure. When shut-off, V1 will be shut tightly as per DIN88 Class A. Outlet pressure adjustable through the knob at the top.

Material:Valve Body: Die-casting Aluminum

Electromagneticgear: Brass, Steel, Aluminum Alloy

Sealing: NBR for G260/1 gases

Temperature:-12℃ to +60℃

Installation position:Vertical orhorizontal

Filter:Built-in filter; simple replacement

Sensors or detectors connection:G1/8 as per DIN ISO 228 at the inlet end of V1,betweenV1 and V2, and at the outlet end of V2

Voltage/Frequency:50/60Hz,230V±15% (others can be customize)

Working time:100%of all time

Protection:IP54

Electrical connection:As per DIN43650

Interference:Degree N


Send product request

To: Guangzhou Liancheng Energy Technology Development Co.,Ltd.
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

2inch normally closed solenoid valve replace Dungs valve MB-DLE
2inch normally closed solenoid valve replace Dungs valve MB-DLE Description: Gas MultiBloc/Functicon Solenoid valve intergradesfilter, regulator, valves and pressure sensor in one compact fitting. // Filter // O...
Normal closed gas emergency shut off lpg solenoid valve 1\\\\\\\'\\\\\\\' inch
Normal closed gas emergency shut off lpg solenoid valve 1\\\\\\\'\\\\\\\' inch 生产介绍: 常闭型,电源接通后,快速打开,电源关闭后立即关闭。 阀门两侧和底部均设有旁通口,直径为G1 / 4“(DN10 / 15直径为G1 / 8”) 技术特点: 开放时间:不到1秒 关闭时间:不到1秒 操作次数:每分钟20次。 DN10-25:360...
All supplier products

Same products

China Gate valve
China Gate valve Seller: Yuanda Valve Group Co.,Ltd. China Gate valve China Gate valve A is a type of valve that uses a gate or wedge-shaped dis...
Gate Valve Vs. Ball Valve
Gate Valve Vs. Ball Valve Seller: Yuanda Valve Group Co.,Ltd. Gate Valve Vs. Ball Valve Gate valves and ball valves are both types of valves that are used...
Non Return Valve Suppliers China
Non Return Valve Suppliers China Seller: Yuanda Valve Group Co.,Ltd. Non Return Valve Suppliers China refers to the opening and closing member for the circular v...
Common Types Of Check Valves
Common Types Of Check Valves Seller: Yuanda Valve Group Co.,Ltd. Common Types Of Check Valves A is a valve whose switching parts are disc-shaped and rely on ...
Brass ball valve
Brass ball valve Seller: Yuanda Valve Group Co.,Ltd. Brass ball valve Brass ball valve Applications: Water Supply: Commonly used in residentia...