.

Hydraulic Non-Slam Check Valve

Basic Information of Hydraulic Non-Slam Check Valve

This valve prevents backflow of media and reduces water hammer to achieve the safe and quiet effect. downloadDof960 series of cases

Features of Hydraulic Non-Slam Check Valve

  1. 2. Automatic control using medium energy;3. Prevent water hammer phenomenon;4. Slowly-closing silencing.Principle of Hydraulic Non-Slam Check Valve

When the pipe supplies water from the inlet end of the valve, the water from the needle valveand one-way valve enters the valvecover control room and then is discharged downstream through the ball valve. Due to the small opening of the needle valve, the discharge speed of the control room is greater than that of the inlet to replenish water, thus reducing the pressure in the control room. The inlet pressure acting under the main valve disc all the time lifts the main valve disc, thereby opening the main valve disc and supplying water downstream. When the pipeline stops supplying water, the downstream water begins to flow back. Due to the effect of the one-way valve, the backflow water cannot flow out after entering the valve cover control room through the ball valve. As a result, the pressure of the valve cover control room increases gradually and the main valve disc is closed tightly.

Installation and Commissioning of Hydraulic Non-Slam Check Valve

Needle valve and ball valve adjust together to get the best opening or closing speed. For specific use, please consult ZECO Valve Group.

Part

Material

Standard

Body

Ductile Iron

EN 1563/DIN 1693

Bonnet

Ductile Iron

EN 1563/DIN 1693

Trim

Stainless Steel 431

EN10088-1/ASTM A959

Seat

Stainless Steel 431

EN10088-1/ASTM A959

Diaphragm

EPDM / NBR

ISO 4633

Pilot Valve

Stainless Steel 431

EN10088-1/ASTM A959

For the materials options not listed, consult factory.

ZECO manufactures valves in more than 50 different alloys.

Product scope , Standards & Materials of Hydraulic Non-Slam Check Valve

Size Range: 2"~24"Pressure Rating: 10bar ~ 25barFace to Face Dimensions: AMSE B16.10, EN558-1Flange End Dimension: AMSE B16.1/16.42, AS4087, EN1092-2Coating: Fusion Bonded Epoxy CoatingInspection and Test: ISO 5208 / EN 12226-2

Zhengfeng Valve Group Co., Ltd. is a professionalnon slam check valve suppliers, hydraulic check valve manufacturersand non slam check valve manufacturer. We provide Control Valve, Balancing Valve, check valve china, anti slam check valve, non slam swing check valve, wafer type non slam check valveand so on. Want to know about non slam check valve meaning? Please contact us.


Send product request

To: ZhengFeng Valve Group
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

6 Inch Ball Valve
6 Inch Ball Valve Description of 6 inch valve: ZECO group valveis a well-known ball valve manufacturer in China.Since its establishment in 1991, it has been produci...
Swing Check Valve
Swing Check Valve What is a Swing Check Valve? A Swing Check Valve is desinged to prevent the medium in the pipeline from flowing back. As pressure reaches zero, th...
Adjustable Dynamic Flow Balancing Valve
Adjustable Dynamic Flow Balancing Valve Basic information This valve can manually adjust the set flow rate in the pipeline, and also can automatically maintain the pressure difference bef...
Resilient Gate Valve for Underground 1025
Resilient Gate Valve for Underground 1025 Basic information This underground gate valveis used as a two-way closed circuit device. Featuresof Resilient Gate Valve for Underground Principleo...
Foot Valve 1025
Foot Valve 1025 Basic information of Foot ValveThis valve is installed at the bottom of the pump's underwater pipette, restricting the return of the liquid to the ...
All supplier products

Same products

High-reliability Support ring Y10-4 for power station
"High-reliability Support ring Y10-4 for power station Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD "High-reliability Support ring Y10-4 for power station Deyang YOYIK have power plant professional...
Wear Resistance dn50 globe valve WJ25-F1.6P for thermal power plant
"Wear Resistance dn50 globe valve WJ25-F1.6P for thermal power plant Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD "Wear Resistance dn50 globe valve WJ25-F1.6P for thermal power plant YOYIK professional productio...
High-efficiency Superheater outlet plug valve SD61H-P61305V SA-182 F92 for power generation
High-efficiency Superheater outlet plug valve SD61H-P61305V SA-182 F92 for power generation Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD "High-efficiency Superheater outlet plug valve SD61H-P61305V SA-182 F92 for power generation Deya...
Automated Sealing gasket for corrugated pipe shut-off valve KHWJ25F3.2P for power station
Automated Sealing gasket for corrugated pipe shut-off valve KHWJ25F3.2P for power station Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD "Automated Sealing gasket for corrugated pipe shut-off valve KHWJ25F3.2P for power station Is a m...
Class 1500 LB gate valve
Class 1500 LB gate valve Seller: Magpie Valve Packing Gasket Co., Ltd Product Name: Low-EmissionPacking Setfor Class 1500 LB API 6D Gate ValveModel: M600Size: ID 68 mm...