.

6 Inch Butterfly Valve

Description of 6 Inch Butterfly Valve:

As a valve company, ZECO provides detailed installation instructions to ensure high performance and long service life of the 6 wafer butterfly valve. The capacity if piping flanges and valve depends the deformation of gaskets. Acting force of bolting is not only resists force to loosen the connection, but also to keep necessary compressing stress. Taking note of the force does not exceed the gasket load and pressure load. In order to ensure good connection, following instructions shall be noted.

(a) Check flange surface, if any defect appears leakage, groove or impress, repair before installation;

(b) The installation requests of Cast iron flange are more than the ductile cast iron. Proposed to use low-strength steel Bolted to reduce as a result of excessive pre-compression flange of the possibility of exceeding the prescribed stress. To fit flat flange gasket in the flat flange to prevent excessive torque of bolt flange damage. Should not be confused with convex planar flange of the loaded flange In the cast iron flange connection is particularly important that the top is installed on the better to ensure that in the absence of excessive load bolted gasket circumstances make an appropriate compaction force;

(c) Gasket have the capacity of resisting deformation and damage;

(d) Check the centration of assemble-part flanges, Lubricate the threads of boltings. Boltings shall be fasten sequential to make sure level contact between flange and gasket.

Features of 6 Inch Butterfly Valve:

  1. group valveis fast closure;

Material of 6 Inch Butterfly Valve:

No

Part

Material

1

Body

ASTM A351 CF8M

2

Seal Ring

Graphite + SS316

3

Retainer Flange

ASTM A182 F316

4

Pin

ASTM A276 316

5

Disc

ASTM A351 CF8M

6

Stem

ASTM A276 316

7

Stem Packing

Graphite

8

Stem Beating

SS316 + PTFE

9

Bolt

ASTM A193 B8

10

Nut

ASTM A194 8

11

Yoke

ASTM A216 WCB

If you want to know more about 6 inch butterfly valve price, please visit our website.


Send product request

To: ZhengFeng Valve Group
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Check Valve
Check Valve The check valve for water of ZhengFeng is the advanced pipe control equipment at home and abroad, mainly installed at the entrance of hydropower st...
Foot Valve 1025
Foot Valve 1025 Basic information of Foot ValveThis valve is installed at the bottom of the pump's underwater pipette, restricting the return of the liquid to the ...
A105 Globe Valve
A105 Globe Valve Features of a105 valve: Gate valve a105 can use metal seal structure and resilient seal structure, connection mode can also choose lug type, wafer ...
Strainer & Dirt Separator
Strainer & Dirt Separator Strainers, dirt separators and backflow preventers are designed to prevent impurities from entering the specified pipe section. Comparing these thr...
Double Orifice Air Release Valve
Double Orifice Air Release Valve Festures of double air release valve Body is provided with a shock-proof inner tube to protect the float; Lower water pressure can be closed to...
All supplier products

Same products

China Gate valve
China Gate valve Seller: Yuanda Valve Group Co.,Ltd. China Gate valve China Gate valve A is a type of valve that uses a gate or wedge-shaped dis...
Gate Valve Vs. Ball Valve
Gate Valve Vs. Ball Valve Seller: Yuanda Valve Group Co.,Ltd. Gate Valve Vs. Ball Valve Gate valves and ball valves are both types of valves that are used...
Non Return Valve Suppliers China
Non Return Valve Suppliers China Seller: Yuanda Valve Group Co.,Ltd. Non Return Valve Suppliers China refers to the opening and closing member for the circular v...
Common Types Of Check Valves
Common Types Of Check Valves Seller: Yuanda Valve Group Co.,Ltd. Common Types Of Check Valves A is a valve whose switching parts are disc-shaped and rely on ...
Brass ball valve
Brass ball valve Seller: Yuanda Valve Group Co.,Ltd. Brass ball valve Brass ball valve Applications: Water Supply: Commonly used in residentia...