Concentric Butterfly Valve
The concentricbutterfly valveis characterized by the stem center, disc center and body center in the same position. Such structures are simple to make. The common wafer rubber linedbutterfly valvesare of this type. The drawback is that the disc and seat are always in the extrusion, scraping state, large resistance, fast wear. In order to overcome squeeze, scratch, seal performance, seat basically uses rubber or polytetrafluoroethylene elastomeric material, but also because seal material is used on the limit of temperature, this is why traditionally people think the butterfly valve does not bear high-temperature reason.
Therefore, the centralbutterfly valveis basically under the condition of temperature below 60 degrees and pressure below 25 kilograms. The simple structure of thecentric butterfly valvefocuses on the sealing of the rubber seat and the sealing between the rubber seat and the stem. Every middle linebutterfly valvedelivered by ZhengFeng will not give up the strength and pressure test process of each one because of its simplicity, thus ensuring the perfection of this kind of valve. Due to its simple structure, ZhengFeng also pays special attention to its appearance. Theductile iron butterfly valveadopts advanced casting process of inner and outer coating sand, which ensures that every casting mark on the valve body and even the handwriting on the small 2-inch valve body is clearly visible.Butterfly valve manufacturersin China are abundant on the pursuit of higher quality, on the one hand, is to let the customer can get free maintenance rate in terms of use of convenient and simple relieved, on the one hand is to hope that in the long term is abundant brand can be set up in the field of global water butterfly valves, so we would like the attitude of benchmarking to establish the brand, to make our products.
ZECOis one of the most professional control valve manufacturers in china, and we have been devoted to produce control valve chinafor many years. If you want to know more details or want a quotation, just feel free to contact us!
Send product request
Other supplier products
 |
4 Inch Butterfly Valve | Description of 4 Inch Butterfly Valve: ZECO 4 inch flanged gate valveis made of body, disc, stem, seat, stuffing box, gear etc. ZECO butterfly val... |
 |
Metal Seated Ball Valve | As one of the china ball valve manufacturers, ZECO always adhere to exceed customer expectations,to provide customers with more international stand... |
 |
Forged Steel Check Valve | ZECO specializes in producing forged steel check valves for nearly 30 years. The forged steel check valves include forged steel swing check valves ... |
 |
Triple Offset Butterfly Valve | Description of Triple Offset Butterfly Valve: ZECO triple offset butterfly valve adopts three-eccentric structure, which increases angle eccentrici... |
 |
Wedge Gate Valve | Description Wedge gate valve is a linear motion, multi-turn general service valve. Table of Contents Gate valve Types as per Type of Closing E... |
Same products
 |
Клапан | Seller: RongTengXinNuo(Tianjin) International Trade Co.,Ltd | Клапан |
 |
Class 300 Valve | Seller: GangYe Group Co.,Ltd. | Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing... |
 |
Class 3000 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-... |
 |
Class 2500 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ... |
 |
Class 150 Valve | Seller: GangYe Group Co.,Ltd. | globe valve class 150is a pressure rating designation defined by standards organizations, such as... |
