Jinhong Plastic mold components Two-Stage Ejectors AL
Installation and use instructions:
- 1.Firstly, remove the outer bushing 1 from the thread limit mechanism and install it on the ejector plate, and then install it on the thread limit mechanism again;
- 2.Connect and fix the catapult ejector pin with the thread limiting machine, or connect with the ejector pin, and thread through the plate B to fix the front catapult ejector pin;
- 3.Install the mandrel. Before installation in all steps, firstly accurately calculate the required stroke, and then intercept the length of the mandrel, machine the connecting groove, and fix it on the moving mould baseplate through the cushion block;
- 4.Note that the calculation should be accurate before installation, and the ejection stroke cannot be adjusted after installation;
- 5.The movable parts must be kept clean and lubricated regularly to keep them smooth.
More information：
Send product request
Other supplier products
 |
Jinhong Plastic mold components internal latch lock DKL-1 | Product features: 1.The product is installed inside the mould, avoiding conflict with the external parts of the mould and the waterways; 2.The pr... |
 |
Jinhong Mould Fittings 69-Puller bolt a type JH031 | Material Hardness SCM435 HRC22°~28° HV900°-1000° Metric system(mm) DTolerance HTolerance CatalogNo. M e B Type... |
 |
Jinhong Plastic mold components ACCELERLERATED EJECTOR AR-D | Product features: 1.The product shortens the mould change time; 2.It can be installed on the existing mould, saving time and materials; 3.It uses... |
 |
Jinhong Plastic mold components internal latch lock DKL-2 | Warning: As shown in the following figure, the first mould opening stroke must be fully open when the insertion rod is completely removed from the... |
 |
Jinhong Plastic mold components Sliser Units CA-1 | Product features: 1.The product has a compact appearance, is convenient to install and is easy to use; 2.A complete set of components includes a m... |
Same products
 |
press brake die | Seller: Hebei Ruhan Trade Co., Ltd | The press brake machine mold is divided into the upper mold of the bending machine and the lower ... |
 |
Sling Ejector Pin JHN03 | Seller: TAIZHOU HUANGYAN JINHONG MOULD PARTS CO.,LTD. | Ejector pinis the “bouncer” of the injection molding world. They apply force to eject... |
 |
Design, process and manufacture blow mold and injection mold | Seller: Guangzhou Hongying packaging products Co., Ltd | The mold can be customized according to the design drawing or the material object，We have 25 year... |
 |
TERMINAL PIN | Seller: Chengdu Pasic Machinery Co.,Ltd | Pin type: Solid & With hole Material: Copper Standard: EN1555.3 & EN12201.3 Size... |
 |
Electrofusion tapping tee mould | Seller: Chengdu Pasic Machinery Co.,Ltd | Name: Electrofusion tapping tee mould Mould Type: Original processing, Inlay frame mould F... |
