Sling Ejector Pin JHN03
Ejector pinis the “bouncer” of the injection molding world. They apply force to eject a part from the mold, and in some cases can leave marks. We are to design and position pins to minimize their effect on your parts. You can apply this product to release elasticity from the bottom. And the features of the product are that it can adjust to the required eject height in advance and it is easy to install.
Material Hardness
1.2101 HRC58°±2
Product Details
Type Dimension
AB C D H
JHN03-1 6 M10x0.75 16 3x87
JHN03-2 8 M12x0.75 18 4x109
JHN03-3 10 M14X0.75 20 4x1211
JHN03-4 12 M16x0.75 22 4x1413
Because the contact surface is parallel with the ejector plate, the thickness of release elasticity from the bottom's smallest area is just 4mm, and a new characteristic of this product is that ejecting first and then releases elasticity from the bottom.
Send product request
Other supplier products
 |
CP-CPS-CPH-CPHS Gas Spring-Higher Forces | CP-CPS-CPH-CPHS Higher Forces Nitrogen Gas Spring series: • Higher forces in the same diameter. • Higher loading pressure. • Conn... |
 |
MOULD PART Positioning Components YK30 Taper Block Sets JH044 | Attentions given by positioning component supplier who wholesales high quality positioning component: Remember the following points as you positio... |
 |
Straight Ejector Sleeve Pins | JH Ejector Sleeve ranges from straight, step, multiple step, or thin walled sleeves. Nitrided SKD61 being the most commonly used steel in ejection ... |
 |
Shoulder Ejector Sleeve Pins | Material InnerHardness SurfaceHardness Heat Treatment FDAC HRC38°±2° HV1000°±100° Nitrided HRC5... |
|
|
Sling Ejector Pin JHN03 | Ejector pinis the “bouncer” of the injection molding world. They apply force to eject a part from the mold, and in some cases can leave... |
Same products
 |
press brake die | Seller: Hebei Ruhan Trade Co., Ltd | The press brake machine mold is divided into the upper mold of the bending machine and the lower ... |
|
|
Sling Ejector Pin JHN03 | Seller: TAIZHOU HUANGYAN JINHONG MOULD PARTS CO.,LTD. | Ejector pinis the “bouncer” of the injection molding world. They apply force to eject... |
 |
Design, process and manufacture blow mold and injection mold | Seller: Guangzhou Hongying packaging products Co., Ltd | The mold can be customized according to the design drawing or the material object，We have 25 year... |
 |
TERMINAL PIN | Seller: Chengdu Pasic Machinery Co.,Ltd | Pin type: Solid & With hole Material: Copper Standard: EN1555.3 & EN12201.3 Size... |
 |
Electrofusion tapping tee mould | Seller: Chengdu Pasic Machinery Co.,Ltd | Name: Electrofusion tapping tee mould Mould Type: Original processing, Inlay frame mould F... |
