.

Liquid Thermal shock test chamber

Liquid Thermal shock test chamber

Three Zone Thermal Shock Test Chamber

Thermal Shock Test Chamber

Liquid Thermal Shock Test Chamber,Cold and hot impact machine can be used to test material structure or composite material, in an instant by extremely high temperature and extremely low temperature continuous environment can endure degree, in order to in the shortest time test commits any heat bilges cold shrink caused by the chemical changes or physical damage. Applicable objects including metal, plastic, rubber, electronics, pv, solar... And other materials, the products can be used as a basis of improving or reference.

Significant reductions in fluid usage make liquid thermal shock affordable

Purchasing a liquid thermal shock chamber needs close consideration of the long term operating costs. The specialized liquids used can easily evaporate, causing the loss of thousands of dollars of fluid per year, if not properly contained. Liquid-to-liquid thermal shock testing is typically conducted to apply very strong, repetitive thermal stress to test pieces. It can model a product's ability to withstand thermally-induced size changes, crack resistance, hermetic integrity, and changes in electrical properties. This form of testing provides a very rapid temperature shock recovery of conditions, and it can significantly reduce testing time by requiring shorter soaks and less cycles. Theliquid thermal shock chambers have been built to meet the demanding test requirements, which has become a defacto industrial standard for semiconductor devices.

Applications:

1 Test physical changes of IC, PCB, ceramic semiconductors and other high polymer materials.2 High and low temperature liquid tanks use forced mixing convection way.3 Automatically move testing samples from up to down or left to right to preheating, precooling.4 Use Garden D02TS in hot and cold chambers to reduce the cost.5 Suitable for water cooling and air cooling.

Features

Multiple mechanisms for reduction of fluid losses

Automatic shutters at bath inlets

Condensation pipe at the top rim of the high-temp bath

Vapor recycling unit in the transfer area

Designed for single (Galden) & dual-fluid (Fluorinert) use

Easily located, requires only electric power hook-up

Low noise of only 65 dBa

Touch-screen controller

Technical parameters:

Model No

GLTS-021-65-LW

GLTS-041-65-LW

Testing method

Two-liquid bath system with specimen basket transfer

TestzonesizeW*H*D(mm)

200*350*300*2Bath

260*350*450*2Bath

TestzonesizeW*H*D(mm)

1140*1785*1240mm

1200*1785*1320mm

Performance

Hot bath

Preheattemperaturerange

+80℃~+200℃

Temperaturefluctuation

±2℃

Ambient temp.to+150℃within 90min

+150℃to +60℃within 60min

Cold bath

Precooltemperaturerange

-60℃~0

Temperaturefluctuation

±2℃

-65℃to 0within 60min

Ambient temp.to -65℃within 120min

System

Circulation system

Siroccofan

Heatingsystem

SUS#304stainlesssteelhigh-speedheater

Cooling system

Imported compressor,Tecumseh compressor(or Bizer Compressor),finned type evaporator,air(Water)-cooling condenser

Controller

TEMI990,8226,8227,8229

Thermal shock range

-65.00℃~00.00℃/+600.00℃~150.00℃

Testing time

5min

5min

Transfer time

Approximately 10 seconds

Specimen Basket size(mm)

100*180*200mm

160*180*350mm

Specimen basket load capacity

1C 2Kg

1C 5kg

Controller

Color TFT LCD panel(6.5inch)

Power supply

AC 1Ψ 220V;3Ψ 380V 60/50Hz



Send product request

To: Grande Electronics Technology Limited
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Liquid Thermal shock test chamber
Liquid Thermal shock test chamber Liquid Thermal shock test chamber Three Zone Thermal Shock Test Chamber Thermal Shock Test Chamber Liquid Thermal Shock Test Chamber,Cold and ho...
Xenon Water-Cooling Aging Test Chamber
Xenon Water-Cooling Aging Test Chamber XenonWater-Cooling AgingTest Chamber UV Aging Test Chamber Ozone Aging Chamber XenonWater-CoolingAging Test Chamber,is designed to simulate full...
3-layers temp humi test chamber
3-layers temp humi test chamber 3-layers temp humi test chamber Programmable Temperature And Humidity Test Chamber Temperature Humidity Test Chamber It is applied to test the m...
Salt corrosion spray test chamber
Salt corrosion spray test chamber Salt corrosion spray test chamber Configured for your specific tests Alternate Salt Corrosion Spray Test ChamberGrande makes rain and spray testi...
Programmable Temperature and Humidity Test Chambers
Programmable Temperature and Humidity Test Chambers Programmable Temperature and Humidity Test Chambers 3-Layers Temp Humi Test Chamber Temperature Humidity Test Chamber Temperature and Humidity T...
All supplier products

Same products

MECHANIC MEC 4K 2K HD Electronic Eyepiece Camera for Stereo Microscope
MECHANIC MEC 4K 2K HD Electronic Eyepiece Camera for Stereo Microscope Seller: SHENZHEN PHONEFIX TECHNOLOGY CO.,LTD (CHINA PHONEFIX) Description Mechanic MEC 2K/2K PRO/4K HD Electronic Eyepiece Camera can convert a Binocu...
Fluke 15B+ 17B+ 18B+ Digital Multimeter Voltage Frequency Tester
Fluke 15B+ 17B+ 18B+ Digital Multimeter Voltage Frequency Tester Seller: PHONEFIX technology Co.,Ltd iFixes 10CC半透明/全透明/乳白/浅黄色无铅焊膏适用于手机主板CPU BGA维修。iFixes Solder Flux注射器注射焊膏焊膏手机修整焊接耗材系列,适用于电路板纳米芯片、手机...
HTT-02 Hot Tack Tester
HTT-02 Hot Tack Tester Seller: Cell Instruments Co., Ltd The HTT-02 Hot Tack Testeris specifically designed to assess this property by measuring the stren...
SPC-01 Stretch Film Peeling Cling Tester
SPC-01 Stretch Film Peeling Cling Tester Seller: Cell Instruments Co., Ltd The SPC-01 Stretch Film Peeling Cling Testermeasures the adhesion between two layers of stretch f...
FTT-01 Film Thickness Tester
FTT-01 Film Thickness Tester Seller: Cell Instruments Co., Ltd The FTT-01 FilmThickness Testerutilizes a mechanical scanning technique to measure the thickness ...