Liquid Thermal shock test chamber

Liquid Thermal shock test chamber

Three Zone Thermal Shock Test Chamber

Thermal Shock Test Chamber

Liquid Thermal Shock Test Chamber,Cold and hot impact machine can be used to test material structure or composite material, in an instant by extremely high temperature and extremely low temperature continuous environment can endure degree, in order to in the shortest time test commits any heat bilges cold shrink caused by the chemical changes or physical damage. Applicable objects including metal, plastic, rubber, electronics, pv, solar... And other materials, the products can be used as a basis of improving or reference.

Significant reductions in fluid usage make liquid thermal shock affordable

Purchasing a liquid thermal shock chamber needs close consideration of the long term operating costs. The specialized liquids used can easily evaporate, causing the loss of thousands of dollars of fluid per year, if not properly contained. Liquid-to-liquid thermal shock testing is typically conducted to apply very strong, repetitive thermal stress to test pieces. It can model a product's ability to withstand thermally-induced size changes, crack resistance, hermetic integrity, and changes in electrical properties. This form of testing provides a very rapid temperature shock recovery of conditions, and it can significantly reduce testing time by requiring shorter soaks and less cycles. Theliquid thermal shock chambers have been built to meet the demanding test requirements, which has become a defacto industrial standard for semiconductor devices.

Applications:

1 Test physical changes of IC, PCB, ceramic semiconductors and other high polymer materials.2 High and low temperature liquid tanks use forced mixing convection way.3 Automatically move testing samples from up to down or left to right to preheating, precooling.4 Use Garden D02TS in hot and cold chambers to reduce the cost.5 Suitable for water cooling and air cooling.

Features

Multiple mechanisms for reduction of fluid losses

Automatic shutters at bath inlets

Condensation pipe at the top rim of the high-temp bath

Vapor recycling unit in the transfer area

Designed for single (Galden) & dual-fluid (Fluorinert) use

Easily located, requires only electric power hook-up

Low noise of only 65 dBa

Touch-screen controller

Technical parameters:

Model No			GLTS-021-65-LW	GLTS-041-65-LW
Testing method			Two-liquid bath system with specimen basket transfer
TestzonesizeW*H*D(mm)			200*350*300*2Bath	260*350*450*2Bath
TestzonesizeW*H*D(mm)			1140*1785*1240mm		1200*1785*1320mm
Performance	Hot bath	Preheattemperaturerange	+80℃～+200℃
		Temperaturefluctuation	±2℃
			Ambient temp.to+150℃within 90min
			+150℃to +60℃within 60min
	Cold bath	Precooltemperaturerange	-60℃～0
		Temperaturefluctuation	±2℃
			-65℃to 0within 60min
			Ambient temp.to -65℃within 120min
System	Circulation system		Siroccofan
	Heatingsystem		SUS#304stainlesssteelhigh-speedheater
	Cooling system		Imported compressor,Tecumseh compressor(or Bizer Compressor),finned type evaporator,air(Water)-cooling condenser
	Controller		TEMI990，8226，8227，8229
Thermal shock range			-65.00℃～00.00℃/+600.00℃～150.00℃
Testing time			5min	5min
Transfer time			Approximately 10 seconds
Specimen Basket size(mm)			100*180*200mm	160*180*350mm
Specimen basket load capacity			1C 2Kg	1C 5kg
Controller			Color TFT LCD panel(6.5inch)
Power supply			AC 1Ψ 220V；3Ψ 380V 60/50Hz

Other supplier products

	HAST PCT high-low temperature test chamber with pressure high pressure	HAST PCThigh-low temperature test chamber with pressure high pressure accelerated aging testing chamber factoryHigh Accelerated Stress Test Steam ...
	Temperature only test chamber/High and low temperature test chamber	Temperature only test chamber/High and low temperature test chamber Temperature Only Test Chambers High And Low Temperature Test Chamber Tempera...
	Sterilization oven	Sterilization oven Tunnel Oven Precision Vacuum Oven GMH series High Temperature Sterilization Ovens are applicable to the bacteria-killing, p...
	Salt corrosion spray test chamber	Salt corrosion spray test chamber Configured for your specific tests Alternate Salt Corrosion Spray Test ChamberGrande makes rain and spray testi...
	High altitude low pressure simulation test chamber	High altitude low pressure simulation test chamber Altitude Chamber For Sale Altitude Test Chambers Temperature testing at altitudes up to 100,0...

供应产品

Same products

	Air Permeability Tester STD- F8	卖方: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	卖方: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	卖方: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	卖方: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	卖方: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...