Solar panel Damp heat testing chamber with IEC 61215-2:2016 standard
Standard:According to IEC61215,UL1703 standard requirement
Purpose:To determine the ability of the module to withstand the effects of long -term penetration of humidity
Technical specifications
1、Test temperature：85℃±2℃
2、Relative humidity:85％±5％
3、Temperature fluctuation：≤±1℃
4、Temperature deviation：≤±1℃
5、Temperature uniformity：≤2℃
6、Humidity range：30～95％RH
7、Relative humidity deviation：≤±2.5 ％RH（Humidity﹥75％RH）
8、Common moisture point：85℃/85％RH continue time≥1000h 90℃/90%RH continuity≥1000h
9、Touch screen +PID intelligence control
10、Can placed 12 PCS test modules
11、Inner chamber size：approx 1.5×2.5×1.5m (L*W*H)
12、Outer chamber size：approx 2.5×3.0×2.5m (L*W*H)
13、Inner chamber material：Stainless steel(SUS #304)
14、Outer chamber material：Steel plate baking finish
15、PIDautomatic calculus
16、Thermal insulation material: hard foam and glass wool
17、Chamber door ：double type
18、With cut off program memory:restart after can automatic restart and continue perform program function
19、Communicate interface：RS-232or RS-485communicate interface
20、Air supply circulation system：Motor
21、Refrigerant：Environmental protection refrigerant; condenser: water-cooled
22、Interface show：Touch screen control
23、Language: Chinese and English change each other
24、data acquisition：Export, view graphic function
25、Power：380V 60HZ
Send product request
Other supplier products
 |
Mechanical Load Tester for pv module | Purpose: This test is to determine the ability of the module to withstand wind , snow , static or ice loads Technical specifications: 1、The mach... |
 |
Cord Anchorage pull testing Machine with IEC61215-2:2016 standard | Standard:according to IEC61215-2 standard requirement Purpose:Simulate module during the installation process , The module cord anchorages are uni... |
 |
Hail Impact Tester for pv module | Standard:According to IEC61215,IEC61646,UL1703 standard requirement Purpose:to verify that the module is capable of withstanding the impact of hai... |
 |
Thermal cycle/humidity freeze environment chamber | Standard:According to IEC61215,UL1703 standard requirement Purpose: To determine the ability of the module to withstand thermal mismatch, fatigue ... |
|
|
Solar panel Damp heat testing chamber with IEC 61215-2:2016 standard | Standard:According to IEC61215,UL1703 standard requirement Purpose:To determine the ability of the module to withstand the effects of long -term p... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
