Solar panel Damp heat testing chamber with IEC 61215-2:2016 standard

• 

Standard:According to IEC61215,UL1703 standard requirement

Purpose:To determine the ability of the module to withstand the effects of long -term penetration of humidity

Technical specifications

1、Test temperature：85℃±2℃

2、Relative humidity:85％±5％

3、Temperature fluctuation：≤±1℃

4、Temperature deviation：≤±1℃

5、Temperature uniformity：≤2℃

6、Humidity range：30～95％RH

7、Relative humidity deviation：≤±2.5 ％RH（Humidity﹥75％RH）

8、Common moisture point：85℃/85％RH continue time≥1000h 90℃/90%RH continuity≥1000h

9、Touch screen +PID intelligence control

10、Can placed 12 PCS test modules

11、Inner chamber size：approx　1.5×2.5×1.5m (L*W*H)

12、Outer chamber size：approx　2.5×3.0×2.5m (L*W*H)

13、Inner chamber material：Stainless steel(SUS #304)

14、Outer chamber material：Steel plate baking finish

15、PIDautomatic calculus

16、Thermal insulation material: hard foam and glass wool

17、Chamber door ：double type

18、With cut off program memory:restart after can automatic restart and continue perform program function

19、Communicate interface：RS-232or RS-485communicate interface

20、Air supply circulation system：Motor

21、Refrigerant：Environmental protection refrigerant; condenser: water-cooled

22、Interface show：Touch screen control

23、Language: Chinese and English change each other

24、data acquisition：Export, view graphic function

25、Power：380V 60HZ

Другие товары поставщика

	Hail Impact Tester for pv module	Standard:According to IEC61215,IEC61646,UL1703 standard requirement Purpose:to verify that the module is capable of withstanding the impact of hai...
	Thermal cycle/humidity freeze environment chamber	Standard:According to IEC61215,UL1703 standard requirement Purpose: To determine the ability of the module to withstand thermal mismatch, fatigue ...
	Solar panel Damp heat testing chamber with IEC 61215-2:2016 standard	Standard:According to IEC61215,UL1703 standard requirement Purpose:To determine the ability of the module to withstand the effects of long -term p...
	Mechanical Load Tester for pv module	Purpose: This test is to determine the ability of the module to withstand wind , snow , static or ice loads Technical specifications: 1、The mach...
	UV preconditioning testing chamber for pv module	Standard:According to IEC61215, IEC61646 standard requirement Purpose:to precondition the module with ultra-violet (UV) radiation before the therm...

Похожие товары

	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Продавец: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Продавец: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Продавец: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Продавец: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...