Solar panel Damp heat testing chamber with IEC 61215-2:2016 standard
Standard:According to IEC61215,UL1703 standard requirement
Purpose:To determine the ability of the module to withstand the effects of long -term penetration of humidity
Technical specifications
1、Test temperature：85℃±2℃
2、Relative humidity:85％±5％
3、Temperature fluctuation：≤±1℃
4、Temperature deviation：≤±1℃
5、Temperature uniformity：≤2℃
6、Humidity range：30～95％RH
7、Relative humidity deviation：≤±2.5 ％RH（Humidity﹥75％RH）
8、Common moisture point：85℃/85％RH continue time≥1000h 90℃/90%RH continuity≥1000h
9、Touch screen +PID intelligence control
10、Can placed 12 PCS test modules
11、Inner chamber size：approx 1.5×2.5×1.5m (L*W*H)
12、Outer chamber size：approx 2.5×3.0×2.5m (L*W*H)
13、Inner chamber material：Stainless steel(SUS #304)
14、Outer chamber material：Steel plate baking finish
15、PIDautomatic calculus
16、Thermal insulation material: hard foam and glass wool
17、Chamber door ：double type
18、With cut off program memory:restart after can automatic restart and continue perform program function
19、Communicate interface：RS-232or RS-485communicate interface
20、Air supply circulation system：Motor
21、Refrigerant：Environmental protection refrigerant; condenser: water-cooled
22、Interface show：Touch screen control
23、Language: Chinese and English change each other
24、data acquisition：Export, view graphic function
25、Power：380V 60HZ
在线联系供应商
Other supplier products
 |
Thermal cycle/humidity freeze environment chamber | Standard:According to IEC61215,UL1703 standard requirement Purpose: To determine the ability of the module to withstand thermal mismatch, fatigue ... |
|
|
Solar panel Damp heat testing chamber with IEC 61215-2:2016 standard | Standard:According to IEC61215,UL1703 standard requirement Purpose:To determine the ability of the module to withstand the effects of long -term p... |
 |
Cord Anchorage pull testing Machine with IEC61215-2:2016 standard | Standard:according to IEC61215-2 standard requirement Purpose:Simulate module during the installation process , The module cord anchorages are uni... |
 |
Hail Impact Tester for pv module | Standard:According to IEC61215,IEC61646,UL1703 standard requirement Purpose:to verify that the module is capable of withstanding the impact of hai... |
 |
Mechanical Load Tester for pv module | Purpose: This test is to determine the ability of the module to withstand wind , snow , static or ice loads Technical specifications: 1、The mach... |
Same products
 |
PH-2398 pH/EC/ORP/温度 多参数测试仪 | 卖方: 科立龙电子股份有限公司 | 大显示，可同时进行水质PH、氧化还原电位、电导率、温度的测量； 带背光LCD显示清晰，功能齐全，精度高； 仪表采用微电脑测量与控制技术，具有自动校准功能，方便实用。 内置蓝牙，可以与电脑或... |
 |
ORP-2026S 防水型 土壤ORP&温度 二合一测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
防水型 EC /TDS/温度三合一参数测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 EC ～19.9mS TDS Temp 0～50℃ 分辨率 ... |
 |
EC-98330 电导率营养测试棒 | 卖方: 科立龙电子股份有限公司 | 本营养测试仪适用于水培和农业应用，能够准确测量水中的营养液电导率（EC）单位为mS/cm，以及总溶解固体（TDS）转换为百万分之一（ppm）。 适合需要较高EC值的植物，该测试仪具有高达6.0... |
 |
PH-808防水笔式土壤PH计 | 卖方: 科立龙电子股份有限公司 | 两点按键校准,自动识别pH标准缓冲液 自动温度补偿确保全量程范围的精确测量。 自动电源关闭，有效节省电池能耗。 可替换型电极降低仪表维护与使用成 全防水性能保障在恶劣环境中对仪表的完整保... |
