.

Fabric Scorch Sublimation Tester

Product Information:

Scorch/Sublimation Tester is used to determine color fastness and shrinkage to hot pressing and dry heat and to conduct sublimation tests.The sample is placed between the upper and lower heating plates. The temperature of the upper and lower heating plates is controlled by the independent controller. The heating plate spacing and the weight of the upper test palte can be controlled.Test temperature ranges 120-230 ℃, with regular alarm function foran accuracy control of the testing time.

Testing Standards:
ISO 105 X11/P01, BS 1006, AATCC 92/114/117/133, GB/T 5718/6152, DIN 54022/54060, JIS L0879/L0850


Technical Parameters:
A.Thermaplate: W100×D40mm, Aluminum (same in up and bottom);
B.Temperature control: independent digital mediators with the minimum display of 1℃(one each for top and bottom plates, respectively);
C.A pre-settable digital timer with alarm reminding;
D.Maximum temperature: 250℃;
E.Thermaplate pressure: 4±1 kPa(40cm2);
F.Heater: cartridge heater with 100V, 150W(one with each of top and bottom plates, respectively);
G.Internal Dimension: W250×D300×H230mm.



Send product request

To: Qinsun Instruments Co., Ltd
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Floor Coverings Material Flammability Tester
Floor Coverings Material Flammability Tester TheFloor Coverings Material Flammability Testeris used to test the effects of a small source of ignition on floor coverings. It can be used for eit...
Mask BFE Testing Machine
Mask BFE Testing Machine Mask BFE Testing Machineis used to test the percentage of material containing bacterial suspended particles at a specific flow rate. Features: ...
Radiant Protective Performance Test Device
Radiant Protective Performance Test Device Standardized sample clamping program, strictly meet the standards. While taking into account the operation, is simple and generous. The calorimeter...
Radiant Protective Performance Test Device
Radiant Protective Performance Test Device Standardized sample clamping program, strictly meet the standards. While taking into account the operation, is simple and generous. The calorimeter...
Zipper Testing Machine of Reciprocating Pull
Zipper Testing Machine of Reciprocating Pull Zipper Testing Machine of Reciprocating Pull Testing Standards: QB/T 2171/2172/2173, BS 3084, AS 2332, NF G91-005, JIS S3015, DIN 3419-1, SATRA T...
All supplier products

Same products

Fluke 15B+ 17B+ 18B+ Digital Multimeter Voltage Frequency Tester
Fluke 15B+ 17B+ 18B+ Digital Multimeter Voltage Frequency Tester Seller: PHONEFIX technology Co.,Ltd iFixes 10CC半透明/全透明/乳白/浅黄色无铅焊膏适用于手机主板CPU BGA维修。iFixes Solder Flux注射器注射焊膏焊膏手机修整焊接耗材系列,适用于电路板纳米芯片、手机...
HTT-02 Hot Tack Tester
HTT-02 Hot Tack Tester Seller: Cell Instruments Co., Ltd The HTT-02 Hot Tack Testeris specifically designed to assess this property by measuring the stren...
SPC-01 Stretch Film Peeling Cling Tester
SPC-01 Stretch Film Peeling Cling Tester Seller: Cell Instruments Co., Ltd The SPC-01 Stretch Film Peeling Cling Testermeasures the adhesion between two layers of stretch f...
FTT-01 Film Thickness Tester
FTT-01 Film Thickness Tester Seller: Cell Instruments Co., Ltd The FTT-01 FilmThickness Testerutilizes a mechanical scanning technique to measure the thickness ...
TST-01 Tensile Tester
TST-01 Tensile Tester Seller: Cell Instruments Co., Ltd TST-01 tensile testers are suitable for conducting a variety of tests, including tensile strength...