.

Medical Face Mask Air Exchange Pressure Difference Tester

The Medical Face Mask Air Exchange Pressure Difference Tester is used for the determination of gas exchange pressure difference of medical surgical masks and can also be used to determine the gas exchange pressure difference of other textile materials。 YY 0469-2011 Surgical mask YY 0969-2013 Single-use medical face mask EN 14683:2014 Medical face masks - Requirements and test methods 1, using the suction gas source as the instrument power source, free from test space constraint; 2, with a high precision differential pressure sensor, digital show the sample pressure of both sides; 3, special sample holder to ensure a good clamping sample. Technical Parameters Items Parameters Air supply Suction type Air flow 8L / min Seal type O-ring seal Sample breathable diameter Φ25mm Differential pressure sensor range 0 ~ 500Pa Display mode Digital display pressure difference Power supply 220V, 50Hz



Send product request

To: Qinsun Instruments Co., Ltd
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Medical Face Mask Synthetic Blood Penetration Resistance Tester
Medical Face Mask Synthetic Blood Penetration Resistance Tester Medical masks synthetic blood penetration tester is used to determine the resistance of medical protective masks to penetration by synthetic blood ...
Factory Price of Mask & Respirator Breathing Resistance Tester
Factory Price of Mask & Respirator Breathing Resistance Tester Factory Price of Mask & Respirator Breathing Resistance Tester is used to measure the respiratory resistance and expiratory resistance of respi...
Precision Hastelloy slicer
Precision Hastelloy slicer Used to detect the production of accurate fiber cross-section of the sample material, in order to facilitate the fiber cross-section under the m...
Alcohol abrasion resistance tester
Alcohol abrasion resistance tester Brief Introduction: The test machinecomplies withUL817 and other relevant standards "special rubber fixed to the machine friction rub hammer surfac...
Building material ignition performance tester
Building material ignition performance tester According to GB / T8626, ISO11925 development, suitable for the absence of external radiation conditions, with a small flame directly impact the ve...
All supplier products

Same products

HTT-02 Hot Tack Tester
HTT-02 Hot Tack Tester Seller: Cell Instruments Co., Ltd The HTT-02 Hot Tack Testeris specifically designed to assess this property by measuring the stren...
SPC-01 Stretch Film Peeling Cling Tester
SPC-01 Stretch Film Peeling Cling Tester Seller: Cell Instruments Co., Ltd The SPC-01 Stretch Film Peeling Cling Testermeasures the adhesion between two layers of stretch f...
FTT-01 Film Thickness Tester
FTT-01 Film Thickness Tester Seller: Cell Instruments Co., Ltd The FTT-01 FilmThickness Testerutilizes a mechanical scanning technique to measure the thickness ...
TST-01 Tensile Tester
TST-01 Tensile Tester Seller: Cell Instruments Co., Ltd TST-01 tensile testers are suitable for conducting a variety of tests, including tensile strength...
HST-01 Heat Seal Tester
HST-01 Heat Seal Tester Seller: Cell Instruments Co., Ltd HST-01 HeatSeal Testeris designed for laboratory use, to assess the heat seal ability of surfaces...