Medical masks touch flame retardant performance tester
The Medical masks touch flame retardant performance tester uses a needle burner of specified size (Φ 0.9mm) and uses specific gas (butane) to ignite the test object at 45 ° angle. The fire risk of small flame caused by fault conditions in the equipment is evaluated according to whether the sample is ignited, the duration of combustion and the length of combustion.
Standards:
GB 19083-2010, EN 149, GB 2626, YY 0469
Specifications:
1, head mold automatic movement line with the speed of (60 ± 5) mm / s
2, the height of the flame can be adjusted to 40 ± 4mm
3, with a flame temperature measurement detection thermocouple
4, the flame from the top of the burner height is(20 ± 2) mm, the temperature is (800 ± 50) ℃
5. The distance between the top of the burner and the lowest point of the mask is (20 ± 2) mm
6, the burner height adjustment range of 30mm
7, metal head mold wall thickness of 2 ~ 3mm, resistant to flame burning
8, continued burning time and smoldering time timer: 0 ~ 9999.9 seconds, accuracy: ± 0.1 seconds
9, the power supply: AC220V, 50Hz, 50W
10, Weight: about 30kg
Equipment Features
1). The flame temperature can be adjusted.
2). Digital display of flame temperature.
3). Automatically move to detect.
Medical masks touch flame retardant performance tester is used to determine the tendency of continuous burning, smoldering and carbonization of textiles. It is suitable for the determination of flame retardant properties of woven fabrics, knitted fabrics and coating products.
Qinsun Instruments Co., LTD was founded in 2010, comprised of many experienced engineers and designers standing in the forefront of the industry. Qinsun specialize in the research and development of high quality lab instrument for textile testing industry. Our head office in Shanghai and we provide high quality testing instrument and comprehensive service for textile factory, academic research institute and textile lab worldwide.
Welcome to Contact us!
E-mail:
Whatsapp/
Send product request
Other supplier products
 |
Face Mask Vision Field Tester | Mask Visual Field Tester To determine whether field of vision under the mask meets the standard requirement or not. Feature: Hemispherical surface... |
 |
Synthetic Blood Penetration Tester | Medical mask synthetic blood penetration tester is to determine the resistance of protective masks to the penetration of synthetic blood under diff... |
 |
Synthetic Blood Penetration Testing Equipment | Synthetic Blood Penetration Testing Equipment is used for the determination of resistance of penetration by the synthetic blood under the different... |
 |
Flame Resistance Chamber Burning Tester For Full Face Masks | Flame Resistance Chamber Burning Tester For Full Face Masks is mainly used for plastic, rubber or film directly measured without burning combustion... |
 |
mask pfe test apparatus | The PFE Tester is used to test the particle filtration efficiency of daily protective respirator and medical respirator, and determine the blocking... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
