SK-4000 Concrete Resistivity Tester
Detection Method:Adopt Wenner sensor array (50 mm of spacing) to test concrete resistivity
Test indicator: concrete resistivity
Product Model: SK-4000
Product Application:
Concrete Resistivity tester is also called potential detector (corrosion analyzer).The corrosion of reinforcement in concrete is an electrochemical process. It generates electricity to cause metal dissociated.If the resistance rate is lower, the corrosion current through the concrete will be easier, the corrosion possibility will be greater. So,to test the resistivity of the concrete can effectively evaluate its corrosion resistance and evaluate the existing corrosion degree.
Product feature:
1.Sponge plug type sensor to ensure good electrical contact;
2.128 * 128 large LCD screen display directly;
3.Rechargeable lithium battery guarantees long time work;
4.Keep test data function, continuously record, safe and reliable
5.With micro-printer for printing directly
6.Multifunctional PC will be easy to data storage and processing
7.Portable waterproof instrument box will be easy to carry;
Test Object: Reinforced concrete
Detection principle:
Adopt Wenner sensor array (50mm of spacing) to test concrete resistivity, the resistivity unit will be kΩ•cm).According to the different range of test results, to evaluate its corrosion resistance.
Technical parameter
1.Range: 0 ~ 2000 kΩcm
2.Display resolution: 0.1 k Ω cm
3.Accuracy: + 1 k Ω cm
4.Data storage: > 100
5.PC communication parameters: 2400 baud rate
6.Weight: 400 g
7.LCD Screen size: 128*128
8.Maximum test range: 2000 kΩcm
Instrument specifications
Host size: 180 * 70 * 30 (mm)
Host weight: 0.4 kg
Host shape size: 370 * 260 * 100 (mm)
Host weight:4kg
System configuration
1.NJ-4000 concrete resistivity tester
2.Wenner sensor
3.Standard test module
4.AC adapter
5.Superconducting sponge plug
6.Connecting cable
7.Micro-printer and charger
8.PC software and data
Send product request
Other supplier products
 |
SKSJ-10 tapestry brick adhesive strength tester | Executive Standard JGJ110-2008 Testing standard for adhesive strength of tapestry brick of construction engineering JGJ126-2000 Specification for c... |
 |
SK-RCM Rapid Concrete chloride migration tester | Detection method: Electromigration method (RCM) Executive Standard: NT BUILD 492（Chloride Migration Coefficient from Non – Steady - State Mig... |
 |
SKZY-50/100 anchor shank tension tester | Executive Standard GB50367-2006 Design code for strengthening concrete structure Description: The instrument is suitable for testing the anchorage ... |
 |
SKR51+ Rebar Location System | PurposeSKR51+ rebar Location system is used to test rebar diameter, distribution, coating thickness in concrete. Specification JGJ/T152-2008 Perfo... |
 |
SK-40/60 Multifunction strength tester | Executive standard (CECS69:94) Technical specification for inspection of concrete strength by pull-out post-insert method (JGJ 110-2008) Testing st... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
