SKCL-C Rapid concrete chloride tester

• 

Product introduction
Chloride ion is one important factor to induce reinforcement corrosion. In order to avoid premature reinforcement corrosion, chloride ion in the concrete raw material must be controlled very strictly. The related standards in our country have clear requirements to test chloride ion when chooses the raw materials, such as the matching sand, aggregate concrete, cement and admixture, mixing water, fundamentally avoid adding excessive chloride ion into the concrete. The test of the chloride ion content in concrete structure plays a significant role for the evaluation of the structure safety, and provides the extreme reference value basis for the renovation and repair of the old structure at the same time.
The instrument follows the related standards, such as GB/T 50476-2008, JGJ206-2010, JTJ 270-98 and so on.It adopts the ISE (Ion Selective Electrode) method to rapidly test the water soluble chloride ion content of the inorganic material in room temperature, such as concrete, sand , cement, mixing water, by the equipped professional software and anti-interference chemical reagents, to achieve the purposes of prevention and control of premature concrete reinforcement corrosion occurrence.
Feature:
1. Can test the chlorine ion content of concrete mixture, hard concrete, gravel, admixture, water, and the other water-soluble material, directly output the mol concentration and percentage unit results;
2. The built-in standard formula can directly calculate the chloride ion content of concrete mixture
3. Special ion anti-interference agent can remove the oxidation effect of cyanogens and ammonia, and remove the complexation effect of manganese, lead and other metal ion
4. LCD display, instant printing, one key for completing the test, simple operation
5. Light and small, convenient for carrying, suitable for the field detection
6. Optional micro-printer, can also print immediately without computer
7. Unique self-diagnosis function and PC analysis software
8. Great data storage capacity can store 100 test data, data is continuous, safe and reliable
Test object:
Sea sand, ordinary sand, new mixed concrete, hard concrete, cement, stones, and admixture, concrete mixing water and other water-soluble material.
Detection principle:
NJCL-C Rapid concrete chloride tester adopts the ISE (ion selective electrode) method rapidly to test the chlorine ion content of concrete, sandstone, admixture and the other water-soluble matters. The range of chlorine ion concentration is 10-5 ~ 10-1 M mol/L. Operation is simple, and can be used in the field detection, data accurate and rapid, automatic data processing.
Technical parameters:
Operating Voltage: DC 3.6V
Measurement Accuracy: <10%
Data storage capacity: > 100
PC communication parameters: baud rate 2400
Acquisition time: =<3min
Standby time: > 24 hr
Weight: 240 g
LCD Size: 128 * 128
Test procedures:
1. Weigh sample, add an appropriate amount of distilled water or extract liquor
2. Calibrate electrode and test the sample solution
3 print measurement data
Test results:
1 chloride ions Cl ˉ concentration (mol/L)
2 chloride ion content percentage (%)
3 chloride ion content percentage of concrete (%)

Range: 0.0001% ~ 30.00% (Clˉ) ,10-5 ~ 10-1 M( mol/L)
Accuracy: reading +/- 10% (chloride ion)
Operating temperature: 0 centigrade ~ 40 centigrade
Power: 1) 3.6V adapter; 2) lithium battery
Battery Life: 12 months (8 hours per day)

Instrument Specifications:
Host Size: 180 * 70 * 30 (mm)
Weight: 0.4 kg
Host dimension: 370 * 300 * 180 (mm)
Host weight: 5 kg

Other supplier products

	SK-225 concrete test hammer	Brief introduction: The test hammer submits to standard of GB/T9138-1988 and JJG817-93 and JGJ/T23-2001. NJ-225 concrete test hammer is applied to ...
	SK-40/60 Multifunction strength tester	Executive standard (CECS69:94) Technical specification for inspection of concrete strength by pull-out post-insert method (JGJ 110-2008) Testing st...
	SKCL-C Rapid concrete chloride tester	Product introduction Chloride ion is one important factor to induce reinforcement corrosion. In order to avoid premature reinforcement corrosion, c...
	SKZY-50/100 anchor shank tension tester	Executive Standard GB50367-2006 Design code for strengthening concrete structure Description: The instrument is suitable for testing the anchorage ...
	SKTJ-10 carbon fiber adhesive strength tester	Executive standard CECS 146:2003 Technical specification for strengthening concrete structures with carbon fiber reinforced polymer laminate Produ...

Same products

	Walk In Environmental Chamber	Seller: Guangdong ALI Testing Equipment Co,.Ltd	Application JOEO Multi-functional walk in environmental chamber is the perfect testing place for ...
	Solid Walk In Test Chamber	Seller: Guangdong ALI Testing Equipment Co,.Ltd	Application: JOEO solid walk in test chamber is an all-welded test chamber with an integrated con...
	Compact Walk In Environmental Chamber	Seller: Guangdong ALI Testing Equipment Co,.Ltd	Application JOEO compact walk in environmental chamber is used to test full-size solar panels or ...
	Drying Walk In Environmental Chamber	Seller: Guangdong ALI Testing Equipment Co,.Ltd	Application Dry walk in environmental chambers are a special type of walk in environmental chambe...
	Walk In Test Chamber For CATL Battery	Seller: Guangdong ALI Testing Equipment Co,.Ltd	CATL Battery Walk In Test Chamber JOEO Walk In Test Chamber's temperature cyclic stress screening...