Fabric Flame Retardant Tester
A method is used to determine the damaged area and the length of the damage when the textiles and other materials are burned at 45 °, and the B method is used to determine the number of times the textile contacts the flame at a 45 ° state with hot melt to a specified length.
Standards
GB/T 14645-2014 Textiles-Burning behaviour-45°testdetermination of damaged area and ignitiontimes
Technical Parameters
| Items | Parameters |
| Afterflame time range | 0～99.99s, resolution：0.01s |
| Afterglow time range | 0 ~ 99.99s, resolution: 0.01s Ignition tip distance from the sample distance |
| Ignition time | A method: thin fabric 30s; thick fabric 120s B method: manual |
| Igniter caliber | A method: thin fabric Φ6.4mm; thick fabric Φ20mm B method: Φ6.4mm |
| Sample clip size | A method: shape 500mm × 230mm; inner frame 250mm × 150mm B method: spiral diameter Φ10mm; pitch 2mm; total length 150mm |
| Igniter top distance from the sample | A method: thin fabric 45mm; thick fabric 65mm B method : 45mm |
Send product request
Other supplier products
 |
Automobile wire cyclic bending testing machine | In terms of technical parameters: The swing angle can reach 180 degrees clockwise or counter - clockwise. It is also possible to continuously set a... |
 |
Dry Cleaning And Washing Cylinder | Dry Cleaning And Washing Cylinder Testing Standards: AATCC 162, 16 CFR Part 1610 Applications: Dry Cleaning and Washing Cylinder is designed fo... |
 |
Durability Tester for Automotive Wire Markings | Test Standard: Complies with the ISO19642 standard. Test Method: For the durability tester of automotive wire markings, fix a wire approximate... |
 |
Thermal viscosity tester | Applicable standards: QB/T 2358 （ZBY 28004） : This standard provides detailed technical requirements and test methods for specific types of therma... |
 |
Ejection kinetic energy tester | Product Introduction: Velocity measuring ejection kinetic energy tester, suitable for ejection projectiles, energy storage ejection toys, non-ener... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
