Dynamic cutting test instrument for fluorine-containing wire for aerospace applications
Applicable industry:
This instrument is the main instrument for testing the mechanical strength of fluorine containing wire for aerospace, and it is the necessary testing instrument for the production of aerospace cable.
Applicable standards:
GJB773B and other standards in the annex G dynamic cutting test requirements
Main functions:
1. Fix the sample on the steel platform, place the indenter with φ0.45 steel wire horizontally above the sample, and apply force to the sample in the downward vertical direction at the acceleration speed of 5mm/min until the sample is cut through （through）， and record the minimum cutting strength at this time
2, the unit of force can be switched （N, Kg, lb）
3, when the sample is cut through, it can automatically maintain the size of the cutting force
4, this test is equipped with a set of computer special software
Main parameters:
1. Application force range: 0——1000N
2, afterforce speed: 5mm/min
3, steel rod diameter: 0.51mm（factory equipped with 100PCS）
4, test voltage: DC12V or 24V
5, detection action current: 5mA
6, power: 200W
7. Power supply: 220V/50Hz
8, power: servo motor, ball screw
9, environmental box temperature range: 0——150℃ can be set
Send product request
Other supplier products
 |
Robot dust jacket | Product advantages： Dust preventi,Water repellent,Stain prevent,Wear resistanc; Application industry: Grinding process,Handling opera,Thermal ... |
 |
Leather Bursting strength testing machine | Bursting Strength Tester is an intelligent and automatic rupture strength testing machine to test anti-rupture strength. Features pressure range of... |
 |
Car seat frame durability tester | Applicable standards: GB 11550-2009 "Performance requirements and test methods for car seat headrest" : Appendix B of this standard specifies the ... |
 |
Abrasive Wear Testing Machine | Main Purposes The wet - type rubber wheel abrasive wear testing machine is primarily employed to assess the wear - resistance of metal materials w... |
 |
Low - temperature Impact Test Device for Automotive Wires | Test standard: ISO 6722, ISO 14572, ISO 19642, SAEJ 1128, QC/T 730, JASOD611-2009 Technical parameters: 1） Low temperature impact height: 50-2... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
