Wire Cut - through Tester for Ford Automotive Wires
Applicable Standard:
Engineering Specification - Ford Global Wire specification, PART NO. ES - AU5T - 1A348 - AA
Technical Parameters:
1. Sensing method: High - precision load cell (sensor) 2. Capacity: 200KG 3. Cut - through speed: 10mm/min 4. Effective measurement range (%): 0.5 - 100 5. Accuracy class: Grade 1 6. Load accuracy: Within ±1% of the indicated value 7. Display: Controlled and recorded by computer software 8. Equipped with an automatic stop function upon cut - through 9. Overload protection: The machine will automatically activate protection when the load exceeds the maximum by 10% 10. Power system: AC servo motor 11. Fixture configuration: One set of fixtures selected according to the user's product requirements 12. Power supply: AC 220V±10%, 50HZ, 5A 13. Dimensions: 56X80X170cm 14. Diameter of the cut - through steel wire: 0.45mm 15. Cut - through test voltage: Less than 24V
Send product request
Other supplier products
 |
PortaCount Respirator Fit Tester | Mask Leak testing deviceTheProtective Mask Leak Testeris a portable device designed to detect the service performance and applicability of protecti... |
 |
Tooth composite resin wear tester | Applicable standards: YY/T 0113-2015 "Dental composite resin wear performance test method" : This standard specifies the test method of de... |
 |
Bag fastener magnetic buckle testing machine | Product Introduction: This machine is mainly used to test the durability of the finished magnetic buckle under the action of tension Implementa... |
 |
Mask Fit Tester | The mask fit tester is a key device to ensure the protective effectiveness of masks. Working principle: Based on aerodynamics and particle monito... |
 |
Vertical low temperature cold resistance testing machine | Product description: This machine is used to test finished shoes, rubber, plastic, soles, synthetic leather and other cold resistance degree to un... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
