Paper quantitative tester
Product Introduction:
The circular square quantitative sampler （referred to as quantitative sampler） is a special sampler for the quantitative determination of standard samples of paper and paperboard, which can quickly and accurately cut the samples of standard area, and is an ideal auxiliary test instrument for papermaking, packaging and quality supervision and inspection industries and departments. It is suitable for the quantitative determination of all kinds of paper and the sampling of standard samples required for the physical properties of sheet breakage.
Scope of application:
Sampling of paper, cardboard, carton, toilet paper, film, non-woven fabric, aluminum foil, copper foil, whiteboard paper, double-adhesive paper, copy paper, kraft paper, kraft paper, white cardboard, coated paper, gray board paper, corrugated cardboard, rubber, leather, fiber materials, cloth, quantitative sampling of film, flexible packaging and other composite flake raw materials.
Reference standard:
GB/T 451.2 "Quantitative Determination of paper and board"
ISO 536 Paper and board - Determination of grammage
Technical indicators:
△ Sample diameter: 112.8mm
△ Sample thickness: 0.1-1.0mm or 0.1-3mm or 0.1-10mm, a variety of options, support customization
△ Sample area: 100cm2, 8cm2, support customization
△ Size: 260×210×300mm
△ Weight: 21.5Kg
△ Type: Manual, pneumatic
Send product request
Other supplier products
 |
Geomembrane Environmental Stress Cracking Resistance Tester | Scope of application: The stress cracking strength of polyolefin geomembrane was measured and evaluated by notch constant load tensile test. Durin... |
 |
Wire Fire Resistance+ Mechanical Shock Testing Machine | Wires and cables that are hard to catch on fire and have the ability to prevent or delay the spread of fire are usually referred to the wires and c... |
 |
Bag lifting fatigue testing machine | Product Introduction: This machine is suitable for up and down vibration fatigue test of plastic handbag, garbage vest bag, kraft paper bag, woven... |
 |
Biodegradable Internal Fixation Device Tester | Standard YY/T 0509-2009 (China): Specifies mechanical testing protocols for orthopedic plates/screws made of hydrolyzable polymers, including axia... |
 |
Battery short-circuit tester | The device is designed based on a variety of battery short-circuit test standards. According to the standard requirements, the short-circuit devic... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
