Paper quantitative tester
Product Introduction:
The circular square quantitative sampler （referred to as quantitative sampler） is a special sampler for the quantitative determination of standard samples of paper and paperboard, which can quickly and accurately cut the samples of standard area, and is an ideal auxiliary test instrument for papermaking, packaging and quality supervision and inspection industries and departments. It is suitable for the quantitative determination of all kinds of paper and the sampling of standard samples required for the physical properties of sheet breakage.
Scope of application:
Sampling of paper, cardboard, carton, toilet paper, film, non-woven fabric, aluminum foil, copper foil, whiteboard paper, double-adhesive paper, copy paper, kraft paper, kraft paper, white cardboard, coated paper, gray board paper, corrugated cardboard, rubber, leather, fiber materials, cloth, quantitative sampling of film, flexible packaging and other composite flake raw materials.
Reference standard:
GB/T 451.2 "Quantitative Determination of paper and board"
ISO 536 Paper and board - Determination of grammage
Technical indicators:
△ Sample diameter: 112.8mm
△ Sample thickness: 0.1-1.0mm or 0.1-3mm or 0.1-10mm, a variety of options, support customization
△ Sample area: 100cm2, 8cm2, support customization
△ Size: 260×210×300mm
△ Weight: 21.5Kg
△ Type: Manual, pneumatic
在线联系供应商
Other supplier products
 |
Knee Prosthesis Abrasion Resistance Analyzer | Standard ISO 14243-1:2014: Specifies wear testing parameters for total knee prostheses, including axial loading, flexion/extension kinematics, and... |
 |
Wire Torsion Tester | Applicable standards: GB/T 239.1-2012 "Metal materials wire Part I unidirectional torsion test method" GB/T 239.2-2012 "Metal materials wire Part... |
 |
Helmet Strap Tensile meter | Purpose Apply a certain initial load to the helmet strap system for a certain period of time. Then, let a weight of a certain mass fall from a cer... |
 |
Direcct flame impingement Tester with BS 476-12 | Introduction: The testeris designedaccording to the BS476-12:1991.Method of test for ignitability of products by direct flame impingement.The accu... |
 |
Rubber low temperature brittleness testing machine | Product Introduction: Plastic low temperature embrittlement testing machine is to determine the temperature of rubber and plastic when the sample i... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
