Bio-absorbable Internal Fixation Plates and Screws Tester
Standard
- YY/T 0509-2009 (China): Specifies mechanical testing protocols for orthopedic plates/screws made of hydrolyzable polymers, including axial pull-out, torsion, and 4-point bending tests.
- ASTM F2502-17 (International): Defines methodologies for evaluating the structural integrity of bioabsorbable fixation devices under physiological loading.
- ISO 13779-4: Additional compliance for in vitro degradation testing of resorbable materials.
Product Advantages
- Multi-Modal Testing: Single platform for axial pull-out, torsion, and 4-point bending tests.
- Biodegradation Simulation: 37±1°C pH-controlled water bath with real-time conductivity monitoring.
- High-Resolution Sensors: 0.001 N force/0.001 Nm torque resolution for fragile polymer testing.
- Modular Fixturing: Self-centering clamps accommodate plates (20–100 mm) and screws (2.0–4.5 mm).
- AI-Powered Analytics: Machine learning predicts degradation-induced strength loss over time.
- Regulatory Compliance: Pre-loaded YY/T 0509/ASTM F2502 protocols with automated reporting.
Product Features
- Electromagnetic Servo Actuator: 5 kN axial/1 Nm torsional capacity with programmable load ratios (R=0.1–10).
- 4-Point Bending Fixture: Anatomical curvature adapters replicate physiological stress patterns.
- Dynamic pH Control: 37±1°C water bath with pH 5.5–8.0 adjustment for degradation studies.
- High-Resolution Imaging: Built-in 5MP camera system for crack/corrosion analysis.
- Safety Suite: Emergency stop, chemical-resistant enclosure, and leak detection.
- Touchscreen Interface: Intuitive controls with pre-loaded ASTM/YY test sequences.
Technical Parameters
| Parameter | Specification |
|---|---|
| Max. Axial Force | ±5,000 N (0.001 N resolution) |
| Max. Torsional Moment | ±1 Nm (0.001 Nm resolution) |
| Bending Span | 40–120 mm (1 mm increments) |
| pH Control Range | 5.5–8.0 (0.1 resolution) |
| Temperature Control | 37±1°C (PT1000 sensor) |
| Data Sampling Rate | 10 kHz (synchronized across 8 channels) |
| Power Requirements | 220V/110V ±10%, 50/60Hz, 1,200W |
| Dimensions (W×D×H) | 500 × 450 × 750 mm |
| Weight | 75 kg (net) / 90 kg (with bath) |
| Noise Level | <50 dB (A-weighted) |
Accessories
- Bioabsorbable Fixture Kit:
- Self-centering plate clamps (20–100 mm compatibility)
- Screw torque adapters (2.0–4.5 mm diameter)
- pH-Controlled Water Bath:
- 15L capacity with recirculating pump
- Corrosion-resistant titanium interior
- BioTest Pro Software:
- Automated degradation curve generation and strength retention analysis
- 21 CFR Part 11-compliant audit trail with blockchain timestamping
- Remote monitoring via iOS/Android app
- Operator Kit:
- Calibrated torque wrench set (0.1–1 Nm)
- Implant alignment jigs (ASTM F2502 compliant)
- Calibration Bundle:
- NIST-traceable force/torque calibration weights
- pH electrode calibration solution
- Safety Kit:
- Chemical-resistant gloves
- Acoustic enclosure with 25 dB noise reduction
Send product request
Other supplier products
 |
Safety hat electrical insulation performance tester | Product Information: Safety hat electrical insulation performance tester used to test the electrical insulation performance of safety hat, high de... |
 |
Safety Helmets Impact and Penetration Resistance Tester | Standard GB/T 2811-2019(China’s national standard for helmet safety and impact resistance) GB/T 2812-2006/XXXX(Testing methods for impact a... |
 |
Micro Controll Four-ball Friction Tester | Applicable Standards： When conducting tests, the microcomputer - controlled four - ball friction testing machine needs to comply with the followin... |
 |
Oxidizing liquid time pressure tester/ Liquid Oxidizer Safety Tester/ Oxidizing Agent Pressure Resistance Tester | Product Description： Conforms to UN Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria 11.6.1 Test 1(c)(i): Time... |
 |
Yellowing resistance test chamber | Designed specifically for testing upper and bottom materials for shoes, the chamber utilizes a 300W UV light bulb imported from Germany, ensuring h... |
Same products
 |
Full-Body Garment Stress Tester,FZ/T 70015 | Seller: Standard International Group (HK) Limited | TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe... |
 |
Industrial Dry Cleaning Machine,industrial garment steamer | Seller: Standard International Group (HK) Limited | TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel... |
 |
MST Medical Compression Stocking Tester,compression sock tester | Seller: Standard International Group (HK) Limited | The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the... |
 |
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool | Seller: Standard International Group (HK) Limited | Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi... |
 |
Dental material color stability tester | Seller: Standard International Group (HK) Limited | Application The applications of color stability testers for dental materials are mainly reflecte... |
