Pneumatic fabric stiffness tester GB / T18318.1-2009
Standards:
GB / T18318.1-2009 "Determination of the bending length of textile fabrics" ZB W04003-87 "Fabric stiffness test method Slope cantilever method" Recommended use of the instrument.
Applications:
The instrument is suitable for cotton, wool, silk, linen, chemical fiber and other woven fabrics, knitted fabrics and general non-woven fabrics, coated fabrics and other textiles rigid and flexible test, but also for paper, leather, film and other flexible materials Of the rigid and flexible test.
Product Information:
The bending performance of the fabric is an important physical parameter that we study the properties of fabric, such as crisp, drape, and softness. The instrument uses bending length (also known as overhanging stiffness) and bending stiffness (also called bending stiffness) Mechanical indicators to express "fabric resistance to its curved direction of the shape of the ability to change," collectively referred to as stiffness.
Pneumatic fabric stiffness testerfeatures:
With the infrared beam composition "stealth" detection slope, replacing the traditional tangible slope, to achieve non-contact detection, to overcome the twist due to the specimen is tilted up and affect the measurement accuracy of the problem. While making the measurement tilt adjustable.
The automatic detection system overcomes the shortcomings of the visualization and enhances the anti-jamming. Sample pressure plate automatic landing device to ensure that the pressure plate and sample positioning accuracy and consistency, improve work efficiency.
Technical Parameters:
1. Instrument measurement angle: 41 ° 30 ', 43 °, 45 ° adjustable
2. Extension length range: 0.5cm-20cm (special requirements can be made in the order)
3. Numerical display resolution: 0.01cm
4. Measurement accuracy: ± 1%
5. Specimen specifications: 2.5cm × 20cm
6. Work platform specifications: 5cm × 20cm
7. Sample pressure plate specifications: 2.5cm × 20cm
8. Sample pressure plate speed: 0.3 ~ 0.5 cm / s (special requirements can be made at the time of order)
9. Rated power: 45W
10. Power: single-phase 220V 50Hz
11. Host volume: 425mm × 250mm × 380mm
12. Host Weight: 16.5Kg
Optional configuration:
Brand laser printer
Send product request
Other supplier products
 |
Appliance Stability Tester | Product Introduction: The device conforms to GB4706-1 Article 20.1, IEC60335-1 Article 20.1 and other standards. The device is composed of a workb... |
 |
Medical injection needle puncture force tester | Medical injection needle puncture force tester - Other test instrument - standard Product Information: The needle puncture force simulates the sk... |
 |
Hexapod Tumbler test instrument | Introduction Hexapod tumbler tester, also known as carpet appearance assessment tester, is designed to determine the appearance maintenance abilit... |
 |
Intervertebral Fusion Cages Shear Fatigue Tester | Standard YY/T 0959-2014 (China): Specifies shear fatigue testing protocols for intervertebral fusion devices, including load ratios, frequency, ... |
 |
Motorized Notching Machine | Product Introduction: Plastic electric notch prototype is a cantilever beam, simply supported beam impact testing machine to do the impact toughne... |
Same products
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
