Electric bicycle lighting device testing machine
Meet the standard:
EN 15194 ISO 4210
UL 2849 ECE R50 StVZO
Scope of application:
Public, inspection, law, accident investigation, fire emergency lighting, railway, power emergency repair lighting and various outdoor construction operations,
The need of large area and high brightness lighting for maintenance and repair, accident handling and rescue and disaster relief work sites.
Lighting equipment:
Composed of 2 500WLED lights, the lamp parts are fixed on the lamp pole through the rotating head, and the wired controller is used
Or the wireless remote control will stand the light pole from the roof of the car to operate the 360 degree rotating head for all-round search positioning and lighting functions.
Irradiation range: 4 fixed rods are selected as the lifting adjustment mode, with a maximum height of 3.5 meters; Remote control head can adjust the lighting 360 degrees
The shooting Angle, the floodlight coverage radius reaches 30-100 meters.
Product Advantages:
Ensures compliance with critical safety and performance standards for e-bike lighting.
Provides accurate and repeatable measurements of photometric and electrical parameters.
Allows for comprehensive evaluation of light distribution and beam patterns.
Facilitates durability testing under simulated environmental and mechanical stresses.
Supports efficient research and development of innovative and reliable lighting solutions.
Contributes to enhanced rider safety and visibility in various conditions.
Helps in meeting regulatory requirements for market access and product certification.
Power supply equipment:
Choose AC220V power supply or AC220V generator power supply, can be continuously used for long-term lighting （self-supplied power supply）
Send product request
Other supplier products
 |
Cylindricity Tester | Performance Overview: The cylindrical instrument can measure the roundness, cylindricity, straightness, concentricity, coaxiality, flatness, paral... |
 |
Mask Tensile Testing Machine ISO13934-1 ISO13934-2 | Mask Tensile Testing Machine： The electrical part consists of a load measuring system and a deformation measuring system. All control parameters a... |
 |
Glass Scratch Tester | Glass abrasion tester is a professional equipment used to test the wear resistance of glass. Applicable standards: ISO 10993-7 United States Pha... |
 |
Spinal Internal Fixation System Component Testing Machine | Standard YY/T 0119-2014 (China): Specifies mechanical testing protocols for spinal fixation components, including screws, plates, rods, and conn... |
 |
Convective Heat Resistance Tester ISO 17493 | Standards ISO 17493 Clothing and equipment for protection against heat - Test method for convective heat resistance using a hot air circulating ov... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
