Helmet Visor High-Speed Pellet Impact Tester/ Helmet visor high-speed impact tester/ Visor ballistic impact tester
Introduction:
In critical environments, from motorsports and tactical operations to industrial safety and extreme sports, a helmet's visor isn't just about clear vision; it's a vital shield against high-velocity threats. When unexpected debris, projectiles, or fragments strike, the visor must maintain its integrity and prevent penetration to safeguard the wearer's eyes and face. This paramount need for robust protection underscores the importance of the Helmet Visor High-Speed Pellet Impact Tester.
This highly specialized instrument is engineered to simulate realistic, high-energy impacts on helmet visors, providing definitive data on their resistance to perforation. It's an indispensable tool for manufacturers, certification bodies, and R&D teams committed to producing and verifying the highest levels of protective eyewear performance.
Main Purpose
To test the impact - resistance performance of glasses, goggles and face shields at a certain speed.
Applicable Standards
SNELL SA/K2010. EN 166. EN 168. ANSI Z87.1. MIL - PRF - 32432
Technical Parameters
1. quality 1g ± 0.1g; diameter 5.5mm ± 0.1mm
2. impact speed: 140~170m/s (adjustable);
3. the control panel has an emergency stop device, higher safety; digital LCD display, display the speed of the projectile (m/s);
4. the test bench has an adjustable device. Convenient for quick and easy installation of helmets;
5. high-speed speed measurement system, the use of advanced high-precision laser speed monitor;
6. the normal operation of the machine needs to be connected with an air compressor. Provide high-pressure gas original with high-precision valve, so that instantly reach the test speed;
7. equipped with a safety police display light, when the door and valve of the equipment is not closed when the equipment can not enter the test state;
8. the instrument operated by the air, the test space for the fully enclosed, the door is installed on the observation port.
Send product request
Other supplier products
 |
Surface Resistance Tester | Surface Resistance Tester - Textile and Apparel - standard Standards: GB/T 22042-2008 Garment. Anti-electrostatic property. Surface resistivity... |
 |
Mask synthetic blood penetration tester | Standards: GB 19083-2010 Technical requirements of medical face masks - Anti-penetration property of 5.5 synthetic blood. YY/T 0691-2008 Clothin... |
 |
Mask Air Tightness Tester | Product Information: The Mask Air Tightness Tester is a portable device designed to detect the service performance and applicability of protective... |
 |
Mask Leakage Tester | Applications: The Mask Integrity Test Accessory (MITA) works in tandem with the CBRN Mask Protection Assessment Test System or PortaCount? Respi... |
 |
Seam Fatigue Tester | Standards: Toyota TSL5101G Section 3.7. GMW 3405. Nissan M-0154. Ford Motor Co. BN 106-02. TSL5100G Section 4.22 Applications: The Seam Fatigue ... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
