Rapid Crack Propagation Tester

The Rapid Crack Propagation Tester is primarily used for testing the critical pressure and critical temperature performance of thermoplastic pipes used for transporting gas or liquids, specifically their resistance to rapid crack propagation.

Applications

1. Plastics/Piping Industry: Testing the rapid crack propagation (RCP) performance of PE, PPR, and other pipe materials to ensure the long-term service safety of water supply and gas pipelines (compliant with ISO 13479 and GB/T 19279 standards);

2. Automotive Industry: Verifying the impact crack resistance of plastic/metal materials used in vehicle body structures, bumpers, etc., to suit collision scenarios;

3. Aerospace/Defense Industry: Evaluating the crack propagation stability of composite materials and metal components under extreme loads to ensure equipment structural safety;

4. Materials Research and Development: Screening materials with excellent crack resistance, optimizing formulations and processes, and providing fracture mechanics data support;

5. Chemical/Energy Industry: Testing the rapid crack resistance of materials used in chemical equipment and energy storage devices to meet safety requirements under high-pressure/low-temperature conditions.

Standards

ISO 13477: Designed exclusively for determining critical pressure (Pc) and temperature (Tc) in polyethylene pressure pipes during rapid crack propagation.

Features

Motorized Strike System:

Electromagnetic actuator with 0–25 Bar hydraulic boost.

3-stage impact energy calibration (10/15/20 m/s).

Cryogenic Chamber (1671 Model):

Liquid nitrogen cooling with <5°C gradient across 1.2m chamber.

Auto-defrost cycle prevents ice buildup.

Pressure Control:

Proportional valve system maintains ±0.1 Bar stability during testing.

Explosion-proof pressure vessels rated to 30 Bar.

Safety Systems:

Dual-layer acrylic shielding with interlock sensors.

Emergency venting system activates within 50ms.

Software Suite:

CrackVision 3D™: Synchronizes pressure, temperature, and high-speed video data.

Cloud RCP™: Remote monitoring for global teams with API integration.

Technical Parameters

Specification	Model 1629	Model 1671
Max. Pipe Ø	250 mm	500 mm
Impact Velocity	10/15/20 m/s	10/15/20 m/s
Test Pressure	0–25 Bar	0–25 Bar
Temperature Range	-20°C to +60°C	-40°C to +60°C
Power Supply	220V/50Hz (110V/60Hz)	380V/50Hz 3-phase
Footprint	1.500mm × 1.200mm	2.400mm × 1.800mm
Weight	850 kg (net)	1.600 kg (net)

Accessoriess

1.Calibration Kit:

NIST-traceable pressure gauge and velocity sensor.

2.Software Add-Ons:

FEA Link: Export stress profiles to ANSYS/Abaqus.

Batch Processor: Queue up to 50 tests overnight.

3.Safety Upgrades:

ATEX-certified enclosure for flammable gas testing.

Acoustic emission sensor for micro-crack detection.

4.Custom Fixtures:

Corrugated pipe adapters (Ø50mm–Ø1.200mm).

High-temperature seals for geothermal applications.

5.Service Contracts:

24/7 remote diagnostics + annual recalibration.

Test Procedures

1. Pre-test Preparation

Check that the instrument power supply, loading mechanism, and crack monitoring system (such as optical sensors and strain gauges) are functioning correctly. Calibrate the load sensor and displacement measuring device, and clean the test bench and fixtures of any debris.

2. Specimen Preparation and Installation

Prepare specimens with pre-existing cracks according to standards (e.g., ISO 13479), and record specimen dimensions, crack length, and other parameters. Secure the specimen in the dedicated fixture, ensuring that the pre-existing crack direction is consistent with the loading direction, and that the fixture is securely tightened to prevent specimen loosening.

3. Parameter Settings

Select the test mode (e.g., tensile, impact loading) via the control panel, set the test temperature, loading rate, crack propagation monitoring threshold, and data acquisition frequency. Confirm that the parameters meet the test standards before saving.

4. Starting the Test

Close the safety guard, press the start button, and the instrument will automatically apply the load and begin monitoring crack propagation. The load-displacement curve and crack propagation rate data will be recorded in real time.

5. Test Monitoring

During operation, observe the instrument's loading stability and crack propagation status. Pay particular attention to recording the critical load, propagation length, and time at which rapid crack propagation occurs, and address any abnormal alarms promptly.

6. Test Completion and Specimen Cleaning

After the specimen fractures or reaches the set crack propagation length, the instrument will automatically unload and stop. After the equipment resets, remove the specimen and record the test results (crack propagation rate, fracture toughness value). Clean the fixture and test bench, turn off the power, organize the test data, and generate a report.

Other supplier products

	Schopper Abrasion Tester	Standards DIN 53863. Part 2: Abrasion test methods for textile fabrics (rotary abrasion test). GME Standard 60345 & GMW Standard 3283: Indust...
	Knee Joint Prostheses Wear Tester	Standard ISO 14243-1:2014: Specifies wear testing parameters for total knee prostheses, including axial loading, flexion/extension kinematics, and...
	Standard Helmet Visual Field Tester	The Standard Helmet Visual Field Tester is a precision instrument designed to evaluate the peripheral vision and visor obstruction of safety helmet...
	Powder Wet Vibrating Screen System For Lithium Battery Material Testing	Standard ASTM E11: Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves ISO 3310-1: Test Sieves – Technical Requirements ...
	Elastic Tape Fatigue Testing Machine	This instrument is used to test the elasticity of elastic belt after reciprocating movement. Application Elastic Tape Fatigue Testing Machineis u...

All supplier products

Same products

	Air Permeability Tester STD- F8	Seller: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Seller: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Seller: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Seller: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Seller: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...