Rapid Crack Propagation Tester

The Rapid Crack Propagation Tester is primarily used for testing the critical pressure and critical temperature performance of thermoplastic pipes used for transporting gas or liquids, specifically their resistance to rapid crack propagation.

Applications

1. Plastics/Piping Industry: Testing the rapid crack propagation (RCP) performance of PE, PPR, and other pipe materials to ensure the long-term service safety of water supply and gas pipelines (compliant with ISO 13479 and GB/T 19279 standards);

2. Automotive Industry: Verifying the impact crack resistance of plastic/metal materials used in vehicle body structures, bumpers, etc., to suit collision scenarios;

3. Aerospace/Defense Industry: Evaluating the crack propagation stability of composite materials and metal components under extreme loads to ensure equipment structural safety;

4. Materials Research and Development: Screening materials with excellent crack resistance, optimizing formulations and processes, and providing fracture mechanics data support;

5. Chemical/Energy Industry: Testing the rapid crack resistance of materials used in chemical equipment and energy storage devices to meet safety requirements under high-pressure/low-temperature conditions.

Standards

ISO 13477: Designed exclusively for determining critical pressure (Pc) and temperature (Tc) in polyethylene pressure pipes during rapid crack propagation.

Features

Motorized Strike System:

Electromagnetic actuator with 0–25 Bar hydraulic boost.

3-stage impact energy calibration (10/15/20 m/s).

Cryogenic Chamber (1671 Model):

Liquid nitrogen cooling with <5°C gradient across 1.2m chamber.

Auto-defrost cycle prevents ice buildup.

Pressure Control:

Proportional valve system maintains ±0.1 Bar stability during testing.

Explosion-proof pressure vessels rated to 30 Bar.

Safety Systems:

Dual-layer acrylic shielding with interlock sensors.

Emergency venting system activates within 50ms.

Software Suite:

CrackVision 3D™: Synchronizes pressure, temperature, and high-speed video data.

Cloud RCP™: Remote monitoring for global teams with API integration.

Technical Parameters

Specification	Model 1629	Model 1671
Max. Pipe Ø	250 mm	500 mm
Impact Velocity	10/15/20 m/s	10/15/20 m/s
Test Pressure	0–25 Bar	0–25 Bar
Temperature Range	-20°C to +60°C	-40°C to +60°C
Power Supply	220V/50Hz (110V/60Hz)	380V/50Hz 3-phase
Footprint	1.500mm × 1.200mm	2.400mm × 1.800mm
Weight	850 kg (net)	1.600 kg (net)

Accessoriess

1.Calibration Kit:

NIST-traceable pressure gauge and velocity sensor.

2.Software Add-Ons:

FEA Link: Export stress profiles to ANSYS/Abaqus.

Batch Processor: Queue up to 50 tests overnight.

3.Safety Upgrades:

ATEX-certified enclosure for flammable gas testing.

Acoustic emission sensor for micro-crack detection.

4.Custom Fixtures:

Corrugated pipe adapters (Ø50mm–Ø1.200mm).

High-temperature seals for geothermal applications.

5.Service Contracts:

24/7 remote diagnostics + annual recalibration.

Test Procedures

1. Pre-test Preparation

Check that the instrument power supply, loading mechanism, and crack monitoring system (such as optical sensors and strain gauges) are functioning correctly. Calibrate the load sensor and displacement measuring device, and clean the test bench and fixtures of any debris.

2. Specimen Preparation and Installation

Prepare specimens with pre-existing cracks according to standards (e.g., ISO 13479), and record specimen dimensions, crack length, and other parameters. Secure the specimen in the dedicated fixture, ensuring that the pre-existing crack direction is consistent with the loading direction, and that the fixture is securely tightened to prevent specimen loosening.

3. Parameter Settings

Select the test mode (e.g., tensile, impact loading) via the control panel, set the test temperature, loading rate, crack propagation monitoring threshold, and data acquisition frequency. Confirm that the parameters meet the test standards before saving.

4. Starting the Test

Close the safety guard, press the start button, and the instrument will automatically apply the load and begin monitoring crack propagation. The load-displacement curve and crack propagation rate data will be recorded in real time.

5. Test Monitoring

During operation, observe the instrument's loading stability and crack propagation status. Pay particular attention to recording the critical load, propagation length, and time at which rapid crack propagation occurs, and address any abnormal alarms promptly.

6. Test Completion and Specimen Cleaning

After the specimen fractures or reaches the set crack propagation length, the instrument will automatically unload and stop. After the equipment resets, remove the specimen and record the test results (crack propagation rate, fracture toughness value). Clean the fixture and test bench, turn off the power, organize the test data, and generate a report.

Другие товары поставщика

	Wet leakage current test system of photovoltaic module	The Wet Leakage Current Test System is designed for high-precision evaluation of insulation resistance and leakage current in photovoltaic modules ...
	UV Lamp Aging Test Tester	Standard JTG E50 T1164: Testing methods for geosynthetics in highway engineering. GB/T 14522-93: Accelerated weathering tests for plastics, coati...
	Cleanliness automatic extractor	Component Cleanliness Cabinet equipped with cleaning modes such as pressure jet cleaning, perfusion cleaning, spray cleaning, etc., the cleaning ag...
	Falling ball impact testing machine	Product Introduction: Falling ball impact tester is suitable for testing the fastness of plastic, ceramic, acrylic, glass fiber and other material...
	Fabric Wrinkle Bending Tester	Overview The Fabric Wrinkle Bending Tester is a specialized instrument used to assess the wrinkle recovery properties of various textile fabrics. ...

Все товары поставщика

Похожие товары

	Full-Body Garment Stress Tester,FZ/T 70015	Продавец: Standard International Group (HK) Limited	TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe...
	Industrial Dry Cleaning Machine,industrial garment steamer	Продавец: Standard International Group (HK) Limited	TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel...
	MST Medical Compression Stocking Tester,compression sock tester	Продавец: Standard International Group (HK) Limited	The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the...
	MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool	Продавец: Standard International Group (HK) Limited	Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi...
	Dental material color stability tester	Продавец: Standard International Group (HK) Limited	Application The applications of color stability testers for dental materials are mainly reflecte...