Syringe piston thrust tester
Product introduction
The syringe piston thrust tester is a kind of high precision and high stability measuring equipment, which is used to measure the thrust of the syringe piston in the process of pushing. The device adopts sensor technology and data processing technology, which can measure piston thrust accurately and quickly, and provide reliable guarantee for quality control in the production process of syringe.
Test principle
The syringe piston thrust tester is mainly composed of sensors, measurement and control systems and displays. Its principle is based on force measurement. By measuring the force generated by the syringe piston when it pushes out the liquid, it can determine whether its thrust meets the standard requirements.
Meet the standard
GB15811. ISO7886. YBB. YBB. YBB. GB 15810-2019. YY/T0573.2-2018
Main parameter
1. Range: 0-500N (300N 1000N 2000N optional)
2. Speed: 1-500mm/min can be set arbitrarily
3. Error: ±0.1mm/S
4. Power supply: AC 220V±22V, 50Hz
Operation process
1. Fix the syringe on the tester to ensure its stable position;
2. Adjust the measuring range of the tester to match the specifications of the syringe under test;
3. Press the start button, the tester starts to measure the piston thrust;
4. Record the measurement results and judge whether they meet the standard requirements;
5. If it does not meet the standard requirements, it is necessary to adjust the syringeor replace the parts;
6. After completing the test, turn off the tester, and record and file the results.
Send product request
Other supplier products
 |
Abrasive Wear Testing Machine | Standard ASTM G65 - 04 GB/T 3960-1983 Main Purposes The wet - type rubber wheel abrasive wear testing machine is primarily employed to assess t... |
 |
Computer-controlled Helmet Impact Tester | A computer-controlled helmet impact tester is an instrument used to test the impact resistance and penetration resistance of helmets. It quantitati... |
 |
Surgical Mask Flame Retardant Tester | The Surgical Mask Flame Retardant Tester is designed to evaluate the flame-retardant performance of surgical masks. In the event that a mask is acc... |
 |
BBA steady state solar simulator tester | Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval IEC 61646: Thin-Film Terrestrial Photovo... |
 |
Minimum Ignition Energy (MIE) – Dust Cloud Tester | Description： Dust Cloud Minimum Ignition Energy Tester disperses a certain mass of dust specimen to be tested into the Hartmann tube device thro... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
