Goggles Puncture Resistance Testing Machine
Applicable standards:
GB 811-2010
ECE R22.05
EN1077
Purpose
It is to make a certain weight of sharp objects fall from the height specified in the standard and act on the surface of helmet or goggles, so as to determine the ability of helmet or goggles to resist penetration by sharp objects.
Technical parameters
1. impact height 1000mm ~ 3000mm
2. impact hammer 3kg, impact hammer cone tip angle of 60 degrees
3. the head fixed frame has an adjustable device to facilitate rapid and convenient installation of helmets
4、The conduit adopts high-strength aluminum tube anodic treatment, beautiful appearance.
5、Hammer lifting method adopts manual lifting
6、Impact hammer adopts electromagnet release device.
7、Total height of the instrument is about 5m
8、Voltage 220V
Send product request
Other supplier products
 |
Geosynthetics Horizontal Penetration Tester | Scope of application: Used to determine the horizontal permeability of geosynthetics under constant head flow conditions. Under the conditions of ... |
 |
Metal Bone Screws Torque Tester | Standard YY/T 1506. ASTM F543: The standard specifies the torque required to measure the torque required to screw a metallic bone grafting screw ... |
 |
Micro Controll High-temperature Friction Tester | Applicable Standards When conducting tests, the microcomputer - controlled high - temperature friction testing machine usually needs to comply wit... |
 |
Solid electrolyte analysis system | Standard ISO 9001:2015(Quality Management System) ASTM E1970-21(Standard Guide for Electrochemical Impedance Spectroscopy) IEC 62660-2(Seconda... |
 |
Lateral Rigidity Tester for Safety Helmets | Standard GB 2812: Safety Helmets (China National Standard) Equivalent Compliance: ISO 6220-2 (Industrial Safety Helmets – Lateral Deforma... |
Same products
 |
Gas Oxidizing Property Tester | Seller: Standard International Group (HK) Limited | Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind... |
 |
Battery Powder Compaction Density Measurement System | Seller: Standard International Group (HK) Limited | The Battery Powder Compaction Density Measurement System is a precision testing system designed... |
 |
Battery Powder resistance tester | Seller: Standard International Group (HK) Limited | The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti... |
 |
KES-SESRU surface roughness/friction tester | Seller: Standard International Group (HK) Limited | TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ... |
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
