Goggles Puncture Resistance Testing Machine
Applicable standards:
GB 811-2010
ECE R22.05
EN1077
Purpose
It is to make a certain weight of sharp objects fall from the height specified in the standard and act on the surface of helmet or goggles, so as to determine the ability of helmet or goggles to resist penetration by sharp objects.
Technical parameters
1. impact height 1000mm ~ 3000mm
2. impact hammer 3kg, impact hammer cone tip angle of 60 degrees
3. the head fixed frame has an adjustable device to facilitate rapid and convenient installation of helmets
4、The conduit adopts high-strength aluminum tube anodic treatment, beautiful appearance.
5、Hammer lifting method adopts manual lifting
6、Impact hammer adopts electromagnet release device.
7、Total height of the instrument is about 5m
8、Voltage 220V
在线联系供应商
Other supplier products
 |
Car seat foam performance tester | Applicable standards: GB/T 6670-2008"Determination of falling ball resilience of soft foam polymeric materials" : This standard specifies the test... |
 |
Coatings Shear Fatigue Tester | Standard YY/T 0988.13-2017 (China): Specifies shear fatigue testing protocols for coatings on metallic substrates, including load ratios, frequenc... |
 |
Torque - to - Failure Tester for Metal Bone - connecting Screws | Standard YY/T 0662-2008(Chinese standard for orthopedic implant testing) ISO 5832-1(Metallic materials for surgical implants – Wrought st... |
 |
Ozone Test Chamber STD-AC22 | Feature Whole chamber inside and gripers made up of stainless steel, anti-corrosion. Outside of the chamber is baking finish (can choose SUS 304 ... |
 |
PV Hail Impact Tester | Standard Compliance IEC 61215: Mechanical load testing for terrestrial photovoltaic modules. UL 61730: Safety standards for photovoltaic modules ... |
Same products
 |
Gas Oxidizing Property Tester | 卖方: Standard International Group (HK) Limited | Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind... |
 |
Battery Powder Compaction Density Measurement System | 卖方: Standard International Group (HK) Limited | The Battery Powder Compaction Density Measurement System is a precision testing system designed... |
 |
Battery Powder resistance tester | 卖方: Standard International Group (HK) Limited | The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti... |
 |
KES-SESRU surface roughness/friction tester | 卖方: Standard International Group (HK) Limited | TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ... |
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
