Negative pressure tester for medical syringes
Negative pressure tester for medical syringes - Other test instrument - standard
Standards:
YY0053-2008, GB 15810-2019 single-use sterile syringe, ISO7886-1:2017 single-use sterile syringe, ISO7886-1, ISO8537-2016, YY0497-2018
Applications:
The negative pressure tester is mainly used to test the physical characteristics of the body
of the syringe, and is one of the important means to identify the body of the medical syringe.
It is suitable for infusion set, blood transfusion set, infusion needle, anesthesia kit, pipeline,
catheter, filter, quick connector, etc.
Product Information:
Instrument characteristics
It is composed of PLC programmable controller, pressure sensor, control mechanism, etc.
It is easy to operate. Real-time display of pressure value, holding time, automatically end the test.
High brightness LED digital display; The pressure output value can be set arbitrarily, and the
verification error is not more than ±1% of the reading.
Technical parameter
1. Operation interface: Simplified Chinese, English
2. Negative pressure detection: -88Kpa error is not more than ±0.3Kpa, LED digital display;
3. Negative pressure output: -88Kpa±0.3Kpa;
4. Detection range: -5 Kpa —— -99 Kpa adjustable.
5. Test duration: 1S —— 9999S arbitrary setting, LED digital display, error is not more than 0.1 seconds;
6. Power supply: AC220V, 50Hz
7. Machine power: 60W
Send product request
Other supplier products
 |
Nanofiber electrospinning device | The Nanofiber Electrospinning Unit uses electrospinning techniques to safely and easily produce nanofibers with diameters of 50 to 800 nm. This dev... |
 |
Upper Leather Flexing Tester | Main uses: VAMP VAMP leather extension testing machine with a certain frequency of zigzag test, observe the change of the surface of the test piec... |
 |
Fully automatic membrane pore size analyzer | Standards: ASTM316, GB/T32361-2015 Applications: Scope of use: Suitable for samples of various materials such as polymers, ceramics, glas... |
 |
Shoe bending Angle tester | Product Introduction: Shoe bending Angle testing machine is mainly used for outsole rigidity test, with a solid block the front of the shoe clampe... |
 |
Fabric Melting Resistance Tester | Product Information: The hot melt properties of the fabric are used for military uniforms, canvas, canvas, labor insurance products. The fabric fu... |
Same products
 |
Falling Sand Abrasion Test machine | Seller: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | Seller: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | Seller: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
 |
High temperature vacum friction & wear tester | Seller: Standard International Group (HK) Limited | The working principle of a high-temperature vacuum friction and wear testing machine is to simula... |
