Seam Fatigue Tester
Seam Fatigue Tester - Automotive Interior - standard
Standards:
Toyota TSL5101G Section 3.7, GMW 3405, Nissan M-0154, Ford Motor Co. BN 106-02, TSL5100G Section 4.22
Applications:
The Seam Fatigue Tester is a two station bench top machine, used for evaluating fabric or leather seating materials resistance to tearing or needle hole elongation of a sewn seam. Each station includes a pair of suitable clamps for attaching the test sample. A set up gage is used to set the 140mm sample clamp separation for each station. One or two stations can be tested at a time.
Product Information:
The operator installs the set up gage between one pair of sample clamps on a station. The sewn test sample is aligned and clamped into position. The set up gage is removed and installed on the second station. The second sample is aligned and clamped into position and the set up gage is removed. The desired number of test cycles is entered on the cycle counter and the test is started. Once this cycle count is reached the machine will automatically stop. Test samples are visually evaluated.
Send product request
Other supplier products
 |
Zipper Reciprocating Tester | IntroductionZipper reciprocating tester is used to measure the zipper performance of products with zippers, such as clothes, textiles, auxiliary ma... |
 |
Hexapod Tumbler test machine | Introduction The steel ball or the hexagonal feet randomly roll in the rotating drum, which is covered with carpet textile samples. Observe the ap... |
 |
Battery Nail Penetration Fire Tester | The nail bed combustion instrument is a professional instrument used to test the combustion performance of various materials. It is mainly used for... |
 |
Wascator FOM 71 CLS Lab Washer - Extractor | Standards: ISO 5077/6330, M&S P1/P1A/P3A/P12/P91/P99/P99A/P13, BS EN25077/26330, NEXT TM7/7A/7B/TM12, GB/T 8629, IWSTM 31, IEC 456 Appl... |
 |
Fully Automatic Continuous Flow Reaction Calorimeter | Product Features： 1. Using the coefficient calibration method and flow - regulation calorimetry, it can quickly obtain the reaction heat release a... |
Same products
 |
Falling Sand Abrasion Test machine | Seller: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | Seller: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | Seller: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
 |
High temperature vacum friction & wear tester | Seller: Standard International Group (HK) Limited | The working principle of a high-temperature vacuum friction and wear testing machine is to simula... |
