Seam Fatigue Tester
Все товары поставщика
Seam Fatigue Tester - Automotive Interior - standard
Standards:
Toyota TSL5101G Section 3.7, GMW 3405, Nissan M-0154, Ford Motor Co. BN 106-02, TSL5100G Section 4.22
Applications:
The Seam Fatigue Tester is a two station bench top machine, used for evaluating fabric or leather seating materials resistance to tearing or needle hole elongation of a sewn seam. Each station includes a pair of suitable clamps for attaching the test sample. A set up gage is used to set the 140mm sample clamp separation for each station. One or two stations can be tested at a time.
Product Information:
The operator installs the set up gage between one pair of sample clamps on a station. The sewn test sample is aligned and clamped into position. The set up gage is removed and installed on the second station. The second sample is aligned and clamped into position and the set up gage is removed. The desired number of test cycles is entered on the cycle counter and the test is started. Once this cycle count is reached the machine will automatically stop. Test samples are visually evaluated.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
KES - FB2 - A Bending Tester | Content The Pure Bending Tester analyzes hand movements-referred to as “bending”-performed by artisans and professionals when judgin... |
 |
Fabric drilling machine | Applications Electric heating drill is applicable to drill the hole of mark in tailor process of cloth, also usded for fixing a pile of fabric whe... |
 |
Rubber low temperature brittleness testing machine | Product Introduction: Plastic low temperature embrittlement testing machine is to determine the temperature of rubber and plastic when the sample ... |
 |
Double Plate Thermal Conductivity Apparatus | Standards: GB/T 10294-2008 ?Determination of Steady State Thermal Resistance and Related Properties of Thermal Insulation Materials GB/T 3399-19... |
 |
Intelligent fiber heat shrinkable tester FZ / T-T50004-1991 | Standards: GB / T6505-1986; FZ / T-T50004-1991 Applications: used to measure a variety of chemical fibers and natural fibers in the dry heat, hi... |
Похожие товары
 |
Falling Sand Abrasion Test machine | Продавец: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | Продавец: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | Продавец: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | Продавец: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
 |
High temperature vacum friction & wear tester | Продавец: Standard International Group (HK) Limited | The working principle of a high-temperature vacuum friction and wear testing machine is to simula... |
