Sole heat resistance testing machine
Main uses:
The sole heat resistance tester is used to test the heat resistance and temperature insulation performance of finished shoes under high temperature sand and stone heat temperature medium.
Reference standard:
EN ISO 20344, EN ISO 8772-1, GB/T 20991-2007, ANSI, JIS, CSA, GB12017-1989, LD50-1994 and other standards
Test principle:
The sandbox is heated to 150℃， the sand covers the contact point between the sample upper and the sole, and the change of the insole temperature over 30 minutes is recorded, accurate to 0.5℃。
Technical parameters:
Sand bath box size: （40±2）cm*（40±2）cm, height: 8cm
Sand height: ≥5cm
Sand size: （0.3 —— 1.0）mm
Sand volume: 5000±250cm
Test temperature: （150±5）℃ or （250±5）℃
Heating power: 2500±250W or more
Heat transfer medium: 5mm steel ball, total mass 4kg
Copper/copper-nickel thermocouple: Solder a copper disc 2±0.1mm thick and 15±1mm diameter
Send product request
Other supplier products
 |
Mask Synthetic Blood Penetration Tester | Medical Face Mask Synthetic Blood Penetration Resistance Tester Medical masks synthetic blood penetration tester is used to determine the resistan... |
 |
High - speed Pellet Impact Testing Machine for Helmet Goggles | Standards: SNELL SA/K2010, EN 166, EN 168, ANSI Z87.1, MIL - PRF - 32432 Applications: To test the impact - resistance performance of glas... |
 |
Midsole Fibreboard Bending Test Machine | Product Introduction: G664 mid-sole fiberboard zigzag testing machine Test leather shoes and casual shoes, walking shoes and other travel shoes, m... |
 |
Zipper Comprehensive Strength Testing Machine | Meet the standard: ASTM D2061 ASTM D2060 BS 3084 JIS S3015 DIN 3419 Product Introduction: The mechanical strength of a zipper's components i... |
 |
Automatic open flash point tester | Product Introduction: The instrument can automatically test the flash point and ignition point of petroleum products （the ignition point of oil ex... |
Same products
 |
Falling Sand Abrasion Test machine | Seller: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | Seller: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | Seller: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
 |
High temperature vacum friction & wear tester | Seller: Standard International Group (HK) Limited | The working principle of a high-temperature vacuum friction and wear testing machine is to simula... |
