Hydraulic press
Leading technical parameters:
Nominal press force: 100MN
Return force: 5000kN
Rated working medium pressure: 31.9MPa
The distance between mould and platen (open): 2700mm
Main gliding block stroke: 1500mm
Working table size: 2500mm x 2500mm
Quick down speed of main gliding block: 200mm/s
Press speed of main gliding block: 40mm/s
Return speed of gliding block: 200mm/s
The press height above ground: 16800mm
Working power: AC400V, +5/-10%, 50Hz
Total power: 4200kW
Machine description:
The equipment is combined pre-tightening frame structure. It is composed of body, oil cylinder, hydraulic system, electric control system and lubrication system.
Body
The body is composed of upper beam, gliding block, working table (lower beam), column, push-rods, locking nuts and others. The frame is formed by upper beam, working table, column through push-rods and locking nuts at a pre-tightening condition. The main oil cylinder and return cylinder is installed on the upper beam, the plunger of oil cylinder connects to the gliding block for driving gliding block to move at an up-and-down direction against the column which is as guiding.
The equipment has an excellent guiding system of gliding block for a best capacity of anti-eccentric loading. It is with heat-expansion X type guide rail.
The limiting displacement of gliding block is considered in the design for preventing from breaking away from cylinder.
Upper beam
The upper beam is made of steel plate of steel grade Q235-A by welding in the protective gas of carbon dioxide, it is aging treated and stress-relief treated after welding. Main oil cylinder and return oil cylinder is installed on the upper beam. The filling tank is installed on the top of upper beam.
Send product request
Other supplier products
|
|
Hydraulic press | Leading technical parameters: Nominal press force: 100MN Return force: 5000kN Rated working medium pressure: 31.9MPa The distance between mould... |
 |
Close die forging press | Max. press force: 30,000ton Leading parameter (1) Nominal press force: ≥70MN (2) Return force: ≥5MN (3) Moveable beam working speed Qui... |
 |
Forging manipulator | MANIPULATOR SPECIFICATIONS CARRYING CAPACITY, NOMINAL: 80 TONS TONGS CLAMPING MOMENT: 2,000 KNM TONGS OPENINGS, WITHOUT INSERTS, ROUND: 800/2,00... |
 |
Ring rolling machine | D53 series 4000 5000 7000 Ring size OD (mm) 500-4000 500-5000 800-7000 Height (mm) 80-700 80-750 80-800 Machine parameter Radial rolling force (... |
 |
Hydraulic open die forging press | 5,000 TON HEAVY 4-COLUMN PUSH-DOWN HYDRAULIC OPEN DIE FORGING PRESS WITH 80 TON FORGING MANIPULATOR PRESS SPECIFICATIONS PRESS FORCE: 400.0 BAR (... |
Same products
 |
The Single Workstation Electrostatic Perforating Machine | Seller: Wuhan Guan You Technology Co., Ltd. | The single workstation electrostatic perforating machineis a professional cigarette paper static ... |
 |
YZH WHEN1510 Stationary Pedestal Rockbreaker Boom | Seller: Shandong Yirun Foundation Engineering Co., Ltd | Below is a detailed introduction to the YZH WHEN1500 fixed hydraulic demolition arm, covering its... |
 |
YZH WHEN1410 Stationary Pedestal Rockbreaker | Seller: Shandong Yirun Foundation Engineering Co., Ltd | YZH WHEN1410 Stationary Pedestal Rockbreaker is a specialized equipment designed for secondary cr... |
 |
JY-160S2 Standard Plastic Injection Machine | Seller: Dongguan Jieyang Machinery Co., Ltd | Straight screw ejected assembly. Two(three)-phase temperature, ejected speed, backing pressure a... |
 |
WPC Terrace panel extrusion line | Seller: Qingdao Trusty Plastic Machinery Co.,Ltd | Wood-polymer composite (WPC), unlike wood, has higher resistance to aggressive environments and v... |
