Cold and warm contact sensation analyzer
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Application
The Thermo Labo is suitable for testing and evaluating:
Bedding materials designed to provide a cooling effect in summer
Underwear and clothing materials intended for warmth in winter
Textile products where contact thermal comfort (coldness or warmth) is a critical property
Fabrics for both dry skin/clothing conditions and wet/sweaty skin conditions (using wet mode)
Standards
JIS L 1927 — Textiles: Measurement method of cool touch feeling property
GB/T 35263-2017 — Textiles: Testing and evaluation for cool sensation at contact instant
CNS15687 / L3272 — Method of test for the instantaneous cool sensation of fabrics
Technical Parameters
| Parameter | Specification |
|---|---|
| Dimensions (W × D × H) | Thermo Labo: 230 × 360 × 80 mm Amplifier: 180 × 400 × 400 mm Thermo Cool: 180 × 180 × 110 mm Thermo Cool Amplifier: 230 × 310 × 220 mm Wind Tunnel Unit (optional): 460 × 320 × 1100 mm Wind Tunnel Amplifier (optional): 125 × 200 × 100 mm |
| Weight | Thermo Labo: 3 kg Amplifier: 15 kg Thermo Cool: 2.5 kg Thermo Cool Amplifier: 5 kg Wind Tunnel Unit (optional): 7 kg Wind Tunnel Amplifier (optional): 1.3 kg |
| Power Supply | 100 VAC, 50/60 Hz |
| Interface | USB ADPU (optional), Data logger output |
| PC Compatibility | Windows 7 / 8 / 8.1 / 10 (PC optional) |
| Sample Size | 180 × 180 mm (standard) |
| Maximum Sample Thickness | 2 mm |
| Measurement Modes | Dry (direct contact) / Wet (sweaty contact) |
| Optional Accessories | Thermo Cool for heat retention, Wind Tunnel Unit for airflow simulation |
Test Principle
The instrument employs heat flux measurement to quantify thermal sensations. The sample is placed between two thermally controlled plates. Heat transfer from the upper plate (simulating skin) to the lower plate is recorded, and the peak heat flux (qmax) is calculated. Optional accessories allow measurement of thermal conductivity and heat retention under controlled airflow conditions.
Operation Instructions
Prepare a flat sample (standard size 180 × 180 mm, thickness ≤2 mm).
Place the sample on the heat plate, ensuring uniform contact.
Select measurement mode: dry or wet.
Set heat plate temperature and number of measurements via touch panel or software.
Start test; the system records qmax and optional thermal conductivity or heat retention data.
Export and save results via PC or data logger.
Ensure safety precautions to avoid burns and maintain stable environmental conditions.
Send product request
Other supplier products
 |
Vertical low temperature cold resistance meter | Product description: This machine is used to test finished shoes, rubber, plastic, soles, synthetic leather and other cold resistance degree to un... |
 |
Photovoltaic module damp heat test chamber | The Photovoltaic Module Damp Heat Test Chamber is designed to simulate long-term tropical aging conditions for photovoltaic modules and related ele... |
 |
Spinneret Inspection Microscope，automatic spinneret mirror inspection instrument | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction ① Mechanical Components Overview 1. This machine employs an X-Y-Z three-axis... |
 |
Manual HEPA/ULPA Filter Scanning Test System，ISO 29463 manual filter scanning and efficiency test system | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Manual HEPA/ULPA Filter Scanning Test System is designed for quality control of HEPA an... |
 |
Mask Synthetic Blood Penetration Tester | Medical Face Mask Synthetic Blood Penetration Resistance Tester Medical masks synthetic blood penetration tester is used to determine the resistan... |
Same products
 |
Paper roughness tester for quality control | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Paper Roughness and Air Per... |
 |
Gas transmission rate tester supplier | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The Differential Pressure M... |
 |
Fully automatic spinneret mirror inspection instrument | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction ① Mechanical Components Ove... |
 |
Advanced textile air permeability tester | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Air Permeability Tester ... |
 |
Anti-scratch surface performance tester | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Surface Performance Test... |
