BJ-918B Scrap Cable Wire Stripping Machine

Produced by: KUNSHAN BOJIN TRADING CO.,LTD.

All supplier products

Operation Video ofBJ-918B Scrap Cable Wire Stripping Machine

This cable stripping machine is the best choice for small recycler of cable recycling.
Cut the waste cable into 1-2 meters.
Put the waste cable into the hole of cable stripper.
Cable stripped will go out from another side.
Use hand to separate the copper core and PVC/PE cover
Get the copper and PVC/PE, and sell to smelters and refiners.
Should you need cable stripper, cable slitter, cable stripping machine, please contact us today!

Diameter from 1.5mm to 98mm
This machine is widely used in the wire stripping industry. It can peel fiber optics protective covering flat wire, the outsourcing metal steel silk thread, the rubbers electric cable line and high tension cable. It can process 1.5mm diameter monofilament, sheath line and steel wire line and so on. The increased diameter, the upper shaft can be arbitrary up and down.

The operator should pay special attention to the safety of hands. FATIGUE OPERATION IS FORBIDDEN!
The pressure should not be too tight. Overload work will shorten the life span of the machine.
If the cabel cannot get through, operator has to check whether the belt is loose or the pressure is too tight, or the blades are wrong directed.
If this machine work with heavy duty for a long time, operator has to check the reansmission oil capacity, grease lubrication is required on the fur shaft gears before working every three months.
Keep daily maintenance of the four bearings, any damage of bearing will cause shaft roken easily after continuous operating.
When work wth bigger size cables, the upper shaft should be kept hanging on the same line by both sides.
Any loosing of the four lifting screw nuts of the transmission an dmotor have to be adjusted by fastening the chain and V-belt. Note: the poslition of transmission and the motor have to be kept parallet.

Choose the right feeding hole, adjust the positioning fixture via the diameter of cable.
Adjust the gap between the drove-gears according to the diameter of cable and the point mentioned in "3" of the following picture. Basically, the gap should be smaller than the diameter or cable.
Keep both sides of the long blades to be symmetrical, as well as the long blades and the position of fixture.

	Enameled Wire Stripping Machine	Installation and use of enameled wire stripping machine. Choose appropriate peeling wheel and install them on the machine. Put two enameled wire i...
	Pneumatic Wire Stripping Machine	Pneumatic Wire Stripping Machine BJ-0320 Magnetic Pneumatic Wire Stripping Machine * Cable cross section: 0.03 – 2.08 mm² (3...
	Coaxial Wire Stripping Machine	Operating procedures of semi-automaticcoaxial wire stripping machine. 1. PurposeEstablish proper equipment to prevent accidents and ensure the nor...
	BJ-930 Scrap Cable Wire Stripping Machine	Operation Video ofScrap Cable Wire Stripping Machine BJ-930 Scrap cable wire stripping machine made in China Features ofScrap Cable Wire Strippin...
	Round Bottle Labeling Machine	Common Problems of Semi—AutomaticRound Bottle Labeling Machine Ⅰ. The position of labeling is unstable 1. It is likely that the pressure ...

The Ultimate Tool for Bubble-Free Displays	Seller: Shenzhen Wikshu Technology Co.	FORWARD FW-16R Bubble Remover and FW-8R Mini Bubble Removal Machine removes screen OCA bubbles du...
Precision CNC Lathe With Conjoined Oblique Rail Cutter Tower	Seller: Zhejiang Guoyu CNC Machine Tool Co., Ltd.	Technical Characteristics: 45° slant bed base structure, with strict aging treatment, smooth ...
Rail Welder A Frame aligners railway welding tools	Seller: 834406	产品描述 A型车架 A-Frame 是一种导轨对准器，可精确对准要焊接的导轨。该设备在焊接操作期间将导轨固定到位。
2 parts fluid mixing dispenser 2 component dosing epoxy PU silicon rubber vacuum system	Seller: 824681	What is the difference between 2K AB adhesive materials manual potting machine and robot pottingm...
Horizontal Machining Center	Seller: Xilong (Shanghai) Machine Tool Co., Ltd.	Horizontal Machining Center parts can automatically finish four sides milling, boring, drilling, ...