Automatic Tape Dispenser

• 

The working principle of tape dispenser：

The tape dispenser is also called a belt cutter. It is mainly used to cut the tape up and down the blade, according to the length of the customer's needs, set the length and cut it. Tape cutting machine has sensors. The tape will drop is at the top of the sensor after being cut. If the tape is removed, the sensor will automatically immediately send a signal to no tape and will move to the next phase of the cutting. Such a process is repeated continuously, called automatic and continuous cutting.

Generally, tape dispenser has the following characteristics:

1. Tape dispenser can cut tape, adhesive paper, protective film and other materials.
2. It can hold two rolls of adhesive tape at the same time and work simultaneously.
3. The tape dispenser has the memory function. Turned on after shutdown, the original data is still saved.
4. With the function of circular shearing, it is free to set different length cycle shear and tape cutting function to cut the adhesive paper with different thickness.
5. Thetape dispenseris safe, with its screen in the cutter. Once the machine is blocked, warning devices work automatically and even if the blockage is removed, the machine will not work immediately, so you must press the start key again after back to work.

6. The tape dispenser is usually designed without a roller.

The use of tape dispenser is divided into the following steps:

1. Turn off the power switch, and then open the safety cover to reach the manual rocker arm to move the frame arm.
2. Adjust the blade until the blade is clamped to the rotary disc.
3. Then remove the frame arm from the rotating disk.
4. Then pass the tape through the blade and stick it to the rotating disk.
Note: keep it in the middle of the adhesive tape and stick it to the rotating disc.
5. If you can't install the tape properly, you can repeat the steps of 1-4 to continue to install the tape dispenser.

Other supplier products

	Coaxial Wire Stripping Machine	Coaxial Wire Stripping Machine BJ-06TZ Automatic Coaxial Cable Cutting And Stripping Machine * Cable Type: coaxial-cable* Memory: 4...
	ZCUT-2 Vinyl Tape Dispenser	Specifications ofZCUT-2 Vinyl Tape Dispenser Available Tape Width: 3 ~ 25mm Available Cut Length: 13 ~ 60mm Adjusting Method: Screw Bobbin:...
	Automaitc Coil Winding Machine	What are the most common problems with automatic coil winding machine and what are the using techniques?There are four common problems with thecoil...
	AL-937B Auto Label Rewinder	Features ofAL-937B Auto Label Rewinder Label winding machine Automatic speed sync and tension control, without any adjustments. Wind inside ...
	MS-1100 Electronic Tape Dispenser	Specifications ofMS-1100 Electronic Tape Dispenser Safety guard system prevents activation of cutter when foreign objects are present Will incr...

Same products

	2 parts fluid mixing dispenser 2 component dosing epoxy PU silicon rubber vacuum system	Seller: 824681	What is the difference between 2K AB adhesive materials manual potting machine and robot pottingm...
	Horizontal Machining Center	Seller: Xilong (Shanghai) Machine Tool Co., Ltd.	Horizontal Machining Center parts can automatically finish four sides milling, boring, drilling, ...
	Horizontal Lathe	Seller: Xilong (Shanghai) Machine Tool Co., Ltd.	As a professional horizontal lathe manufacturerand horizontal lathe factory, Sealion Machine Tool...
	Gantry Machining Center	Seller: Xilong (Shanghai) Machine Tool Co., Ltd.	SEALION supplies Gantry Machining Center both tables moving type or gantry moving type. Gantry ty...
	Floor Type Boring Mill	Seller: Xilong (Shanghai) Machine Tool Co., Ltd.	Floor Type Boring Mill is suitable for large size jobs to do milling, boring, drilling, etc. The ...