Automatic Tape Dispenser

• 

The working principle of tape dispenser：

The tape dispenser is also called a belt cutter. It is mainly used to cut the tape up and down the blade, according to the length of the customer's needs, set the length and cut it. Tape cutting machine has sensors. The tape will drop is at the top of the sensor after being cut. If the tape is removed, the sensor will automatically immediately send a signal to no tape and will move to the next phase of the cutting. Such a process is repeated continuously, called automatic and continuous cutting.

Generally, tape dispenser has the following characteristics:

1. Tape dispenser can cut tape, adhesive paper, protective film and other materials.
2. It can hold two rolls of adhesive tape at the same time and work simultaneously.
3. The tape dispenser has the memory function. Turned on after shutdown, the original data is still saved.
4. With the function of circular shearing, it is free to set different length cycle shear and tape cutting function to cut the adhesive paper with different thickness.
5. Thetape dispenseris safe, with its screen in the cutter. Once the machine is blocked, warning devices work automatically and even if the blockage is removed, the machine will not work immediately, so you must press the start key again after back to work.

6. The tape dispenser is usually designed without a roller.

The use of tape dispenser is divided into the following steps:

1. Turn off the power switch, and then open the safety cover to reach the manual rocker arm to move the frame arm.
2. Adjust the blade until the blade is clamped to the rotary disc.
3. Then remove the frame arm from the rotating disk.
4. Then pass the tape through the blade and stick it to the rotating disk.
Note: keep it in the middle of the adhesive tape and stick it to the rotating disc.
5. If you can't install the tape properly, you can repeat the steps of 1-4 to continue to install the tape dispenser.

Другие товары поставщика

	Multiple Wire Stripping And Twisting Machine BJ-4FN	Features ofMultiple Wire Stripping And Twisting Machine BJ-4FN The machine is suitable for line to coarse computer peripheral cable, tele line, ...
	Round Bottle Labeling Machine	Common Problems of Semi—AutomaticRound Bottle Labeling Machine Ⅰ. The position of labeling is unstable 1. It is likely that the pressure ...
	Harness Taping Machine	Product features of automatic harness . Using environment Ambient environment: -10- +50ºC, relative humidity: 5-95% (no dew) Environment:...
	Coaxial Wire Stripping Machine	Operating procedures of semi-automaticcoaxial wire stripping machine. 1. PurposeEstablish proper equipment to prevent accidents and ensure the nor...
	BJ-940 Scrap Copper Wire Stripper Machine	Features of Scrap Copper Wire Stripper Machine BJ-940: This model wire stripping machine is both manually and electrically operated machine.Unde...

Похожие товары

	2 parts fluid mixing dispenser 2 component dosing epoxy PU silicon rubber vacuum system	Продавец: 824681	What is the difference between 2K AB adhesive materials manual potting machine and robot pottingm...
	Horizontal Machining Center	Продавец: Xilong (Shanghai) Machine Tool Co., Ltd.	Horizontal Machining Center parts can automatically finish four sides milling, boring, drilling, ...
	Horizontal Lathe	Продавец: Xilong (Shanghai) Machine Tool Co., Ltd.	As a professional horizontal lathe manufacturerand horizontal lathe factory, Sealion Machine Tool...
	Gantry Machining Center	Продавец: Xilong (Shanghai) Machine Tool Co., Ltd.	SEALION supplies Gantry Machining Center both tables moving type or gantry moving type. Gantry ty...
	Floor Type Boring Mill	Продавец: Xilong (Shanghai) Machine Tool Co., Ltd.	Floor Type Boring Mill is suitable for large size jobs to do milling, boring, drilling, etc. The ...