Automatic Tape Dispenser
The working principle of tape dispenser：
The tape dispenser is also called a belt cutter. It is mainly used to cut the tape up and down the blade, according to the length of the customer's needs, set the length and cut it. Tape cutting machine has sensors. The tape will drop is at the top of the sensor after being cut. If the tape is removed, the sensor will automatically immediately send a signal to no tape and will move to the next phase of the cutting. Such a process is repeated continuously, called automatic and continuous cutting.
Generally, tape dispenser has the following characteristics:
1. Tape dispenser can cut tape, adhesive paper, protective film and other materials.
2. It can hold two rolls of adhesive tape at the same time and work simultaneously.
3. The tape dispenser has the memory function. Turned on after shutdown, the original data is still saved.
4. With the function of circular shearing, it is free to set different length cycle shear and tape cutting function to cut the adhesive paper with different thickness.
5. Thetape dispenseris safe, with its screen in the cutter. Once the machine is blocked, warning devices work automatically and even if the blockage is removed, the machine will not work immediately, so you must press the start key again after back to work.
6. The tape dispenser is usually designed without a roller.
The use of tape dispenser is divided into the following steps:
1. Turn off the power switch, and then open the safety cover to reach the manual rocker arm to move the frame arm.
2. Adjust the blade until the blade is clamped to the rotary disc.
3. Then remove the frame arm from the rotating disk.
4. Then pass the tape through the blade and stick it to the rotating disk.
Note: keep it in the middle of the adhesive tape and stick it to the rotating disc.
5. If you can't install the tape properly, you can repeat the steps of 1-4 to continue to install the tape dispenser.
在线联系供应商
Other supplier products
 |
Pneumatic Terminal Crimping Machine | Pneumatic Terminal Crimping Machine Cable Hydraulic Crimping Machine BJ-30T * Force:20Ton* Applicable Scope:1-200mm² wire* Strok... |
 |
Pneumatic Wire Stripping Machine | Pneumatic Wire Stripping Machine BJ-0320 Magnetic Pneumatic Wire Stripping Machine * Cable cross section: 0.03 – 2.08 mm² (3... |
 |
BJ-918B Scrap Cable Wire Stripping Machine | Operation Video ofBJ-918B Scrap Cable Wire Stripping Machine BJ-918B scrap wire stripper is the most popular multi-function wire stripping equip... |
 |
Automatic Tape Dispenser | M-1000 Automatic tape dispenser * Tape Width: 7 ~ 50mm* Cut Length: 5 ~ 999mm, Digital Length Adjustment.* Length setting: Digital* Ac... |
 |
BJ-1200 Pneumatic Crimping Machine | Specification ofBJ-1200 Pneumatic Crimping Machine Model: BJ-1200 Crimping range: non-insulated terminals≤10mm² Pre-insulated terminal... |
Same products
 |
The Ultimate Tool for Bubble-Free Displays | 卖方: 深圳市维客修科技有限公司 | FORWARD FW-16R除泡机、FW-8R迷你除泡机，在手机、iPhone、iPad、平板屏幕翻新过程中，去除屏幕OCA气泡，最大支持12.9寸屏幕。安全门设计，24V低压风阀配置，有效降低... |
 |
Precision CNC Lathe With Conjoined Oblique Rail Cutter Tower | 卖方: Zhejiang Guoyu CNC Machine Tool Co., Ltd. | Technical Characteristics: 45° slant bed base structure, with strict aging treatment, smooth ... |
 |
Rail Welder A Frame aligners railway welding tools | 卖方: 834406 | 产品描述 A型车架 A-Frame 是一种导轨对准器，可精确对准要焊接的导轨。该设备在焊接操作期间将导轨固定到位。 |
 |
2 parts fluid mixing dispenser 2 component dosing epoxy PU silicon rubber vacuum system | 卖方: 824681 | What is the difference between 2K AB adhesive materials manual potting machine and robot pottingm... |
 |
Horizontal Machining Center | 卖方: Xilong (Shanghai) Machine Tool Co., Ltd. | Horizontal Machining Center parts can automatically finish four sides milling, boring, drilling, ... |
