LAG-S400 Infrared Converter Slag Detection System
LAG-S400Infrared Converter Slag Detection System
Overview
The infrared converter slag detection system uses a far-infrared thermal imager to monitor the situation of converter tapping in real time, and is connected to the main control computer in the electrical room through the conversion and transmission of video signals. The radiation intensity in the infrared wavelength range of 7-14um is different to distinguish molten steel and slag. In the later stage of the converter tapping, the molten steel gradually decreases, and the steelmakingslag is involved in the molten steel and flows out of the tapping hole. After the thermal imager recognizes the steelmakingslag in the imaging temperature measurement, it will give an alarm according to the slag content ratio threshold set by the software.Thethermal imagerwill start the slide plate to close the tapping hole, so as to realize the control of the slag in the converter tapping, and ensure the maximum yield of molten steel and the minimum control of the steelmakingslag content.
The effect of slag detection in converter tapping is of great significance to the control effect of the slag amount. The converter slag detection and control system developed by our company conducts non-contact monitoring of the tapping steel flow through the far-infrared detector thermal imager. It candetect the slag condition in real timeandoutput an alarm signal and control system, which can replace manual visual inspection and provide accurate,efficient and stable slag detection effect. When the system finds the slag, the intelligent control unit quickly makes a judgment of lifting the furnace and blocking the slagand outputs an alarm signal.
As shown in Figure 1, the system includes thermal imager, front purge protection box, front electrical box, power distribution cabinet, main control monitor, monitorof rocking furnace chamber, sound and light alarm, infrared converter slag monitoring software system, etc.
Thefeaturesof thermal imager
1. The temperature measurement range is -20°C - 2000°C,hightemperature measurement accuracy, and multiple temperature measurement intervals can be set.
2. High-resolution thermal imaging system, the imaging picture is clear, and the imaging color can be freely marked according to the set temperature.
3. With hot zone alarm function, the alarm zone and temperature range can be set arbitrarily.
4. With hot zone tracking function
5. Equipped with special 7~14um infrared filter lens
The technical parameters
1. Temperature measurement range: 200-1800℃
2. Temperature measurement accuracy: 2%
3. Detection accuracy and alarm accuracy: ≥98%
4. Resolution: ≥ 0.5℃
5. Pixels: 640x240
6. Band: 7~14um
7. Field of view: 7.5°×5.5°
8. Frame rate: ≥ 25 frames/sec
9. Equipment service life: ≥5 years
10. The normal operation rate of the automatic control system: ≥99%
Send product request
Other supplier products
 |
MDC-K120 Slab Mold Taper Measuring Instrument | MDC-K120Slab Mold Taper Measuring Instrument Overview The taper of the narrow face of the mold has an important influence on the quality of t... |
 |
BPS-K600 Continuous Casting Mold Breakout System | BPS-K600 Continuous Casting Mold Breakout System Overview: The BPS-K600 continuous casting mould breakout prediction systemisdeveloped by Wuha... |
|
|
LAG-S400 Infrared Converter Slag Detection System | LAG-S400Infrared Converter Slag Detection System Overview The infrared converter slag detection system uses a far-infrared thermal imager to mo... |
 |
WGS-L020 Flat Steel/Ribbon Iron Width Measuring System | WGS-L020Flat Steel/Ribbon Iron Width Measuring System Overview Whether the width and thickness of the flat steel/ribbon iron width measuremen... |
 |
Ladle Comprehensive Management System | LDT-N200 Ladle Integrated Management System Overview: In the steelmaking production process, the ladle is the key equipment for holding molten ste... |
Same products
 |
Lifting Beams Adjustable Lifting Beam | Seller: Hebei Connect Trading Co.,Ltd | Structure: I Beam For Lifting type and streamline form. Working Load Limit: 2 Ton to 50 Ton A... |
 |
Replacement of PALL HC8304FAN16H Hydraulic filter element | Seller: Xinxiang Saya Filters Co., Ltd | Product Advantages: 1. Using glass fiber from the American HV brand as the filter layer, the fil... |
 |
Argo V2.1260-06 Hydraulic Filter Replacement | Seller: Xinxiang Saya Filters Co., Ltd | Performance characteristics of Argo V2.1260-06 Hydraulic Filter Replacement: 1. Good filtration p... |
 |
Eaton Internormen Hydraulic Filter Replacement | Seller: Xinxiang Saya Filters Co., Ltd | Product Description： The filter elements have the characteristic on high pressure collapse resis... |
 |
Sullair / Air Filter Replacement | Seller: Xinxiang Saya Filters Co., Ltd | Ayater air filter Introduction： ● Air Filter Element is a critical part of Compressor, made of hi... |
