Infrared/Laser Cut-to-Length Cutting System
Infrared/Laser Cut-to-Length Cutting System
Overview
The all-digital non-contact infrared automatic cut-to-length cutting system developed by WuhanCenterRise M&CEngineering Co., Ltd. is the first digital measurement, digital transmission, digital positioning and digital control technology in China.It is suitable for the primary and secondary cutting of continuously cast productof square billets, rectangular billets, slabs, round billets and shaped billets.Itcan automatically cut 1-48 billets to length at the same time, and display thecastingspeed and running status of each billet. The system has high measurement and control accuracy and strong anti-interference ability, which improves the output and quality of the castproductsand reduces the labor intensity of the operator. The whole system has the advantages of low investment, simple installation, debugging andoperation, andbasicallymaintenance free. No need to change the original production equipment, a major breakthrough in the automatic cut-to-length cutting method, and it is also an important part of the continuous casting process, which has been highly praised by experts and manufacturers. Digital infrared cutting to length can also provide high-definition solutions, so that the measurement error is ±1mm, and the system can support 12strandshigh-definition CCD image measurement.
The features of the system
1. The system adopts advanced digital image processing technology (non-contact type) to identify the length of hot billet online, automatically controls theflamecutting machine to cut the hot billet to a certain length, detects and displays the running status andcastingspeed, and collectstheimage information of the moving billet from a long distance through an infrared camera.
2. The computer processes the image information by pattern recognition program, forms the operation information and converts it into the electrical signal of the specified format, so thatthehot billetcan be cutby the actuator. The system can cut the 1-48 billetsto length at the same time with an infrared camera.
3. A schematic diagram of theoverall layoutand working principle of the system is shown in Figure 1.
The functions of the system
1. Applicable to all kinds of continuous casting machineflamecutting system.
2. Adopt advanced digital image pickup technology.
3. It is not sensitive to other high-intensity light interference, and overcomes the influence of light sources such as sunlight and arc welding.
4. The system provides abundant interfaces, which can communicate with thePLC control.
5. The fixed-length parameters and data can be directly modified by the secondary system to optimize the fixed-length cutting.
6. Historical cutting data is automatically stored, and the system can set rules for historical data.
7. Support the free transformation of fixed length, and a variety of operation modes are available for the operator to choose.
8. Each stream can send out signals such as pre-clamping, clamping, cutting, roll-up, roll-down and return of the cutting car according to the user's requirements.
9. The monitor displays the running status of the current hot billet in real time and displays the corresponding parameters.
10. Data management can be carried out according to shifts, pouring times, days, weeks, months, etc., as well as data management according to specifications, production capacity, quality, etc.
11. Provide automatic, upper and manual cutting control.
12. The detection and cutting precision is high, and the controllable precision is ±3mm.
The extension of the system
The system can install 1 to 12 cameras. Generally, when one camera cannot meet the requirements,the systemcan be equipped with 2 to 12 cameras. The camera can be fixed inside and outside the operating room perpendicular to theroller line, and the setting height is generally 3-5 meters, so that the camera can clearly and completely capture the image of the moving billet. High-definition line scan cameras can also be provided to perform high-precision positioning of each strand of castproducts. Line scan cameras are used to support up to 12strandsystems, which ensuresthat the center of the viewing angle, the billet head, and the fixed-length mark are vertical to improve the cutting and fixed-length accuracy.
The technical parameters
1. Numbers of caster stands: maximum 12strands
2. Measurement accuracy: ±1mm
3. Cutting method: flame cutting
4. Fixed length range: 6-12m
5. Matchingcastingspeed: 1.5~4.2m/s
6. Fixed length range: 6-12m
7.Temperature rangeof cast products: <1000℃
8. Number of signals: pre-cut, cut
Send product request
Other supplier products
 |
Laser Mold Taper Measuring Instrument | MDC-L200 Laser Taper Measuring Instrument (Multi-dimensionalDetection) Overview: Laser taper measuring instrument(multi-dimensional detection) is ... |
 |
LDT-L200 Ladle Lining Laser Thickness Gauge | LDT-L200Ladle Lining Laser Thickness Gauge Overview LDT-L200 is a new generation ofladlelining thickness gauge launched by our company. The sys... |
 |
Handheld Thermocouple Calibrator | Handheld Thermocouple Calibrator Model: LGK-JS02-064 Overview LGK-JS02-064 handheld thermocouple calibrator is a product independently develop... |
 |
MDC-K400 Square and Round Billet Taper Measuring Instrument | MDC-K400Square and Round Billet Taper Measuring Instrument The product description The square, rectangular and round billet taper measuring i... |
 |
On-line Billet End Continuous Temperature Measurement | ZST-P100 On-line Continuous Temperature Measurement of the Billet End Overview Thesystem aimsat the continuous temperaturedetectionof theproducto... |
Same products
 |
Replacement of PALL HC8304FAN16H Hydraulic filter element | Seller: Xinxiang Saya Filters Co., Ltd | Product Advantages: 1. Using glass fiber from the American HV brand as the filter layer, the fil... |
 |
Argo V2.1260-06 Hydraulic Filter Replacement | Seller: Xinxiang Saya Filters Co., Ltd | Performance characteristics of Argo V2.1260-06 Hydraulic Filter Replacement: 1. Good filtration p... |
 |
Eaton Internormen Hydraulic Filter Replacement | Seller: Xinxiang Saya Filters Co., Ltd | Product Description： The filter elements have the characteristic on high pressure collapse resis... |
 |
Sullair / Air Filter Replacement | Seller: Xinxiang Saya Filters Co., Ltd | Ayater air filter Introduction： ● Air Filter Element is a critical part of Compressor, made of hi... |
 |
Replacement Of Paker Hydraulic Filter Element | Seller: Xinxiang Saya Filters Co., Ltd | AYATER hydraulic oil filter element is a mesh made of multi-layer metal stamping, which is manufa... |
