Mold Surface Cladding Detection Equipment
Mold Surface Cladding Detection Equipment
Overview：
This product is a new type of moldcopper platesurfacecladdingdetectionequipment. The equipment adopts a high-precision and high-sensitivity laser ranging sensor, which scans the copper plate of themouldby scanning a laser line with a fixed width, and returns the measurement data in real time. After modeling and analyzing the data, the upper computer gives the wear data of the moldcopper plate, as well as the data of surface cracks and surface roughness. The host computer software intuitively reflects the surface profile of the detected mold andcladdingthickness deviation and other data to the user in the form of datasheet, data curves and mold3Dmodel diagrams, providing a true and reliable theory for on-site operators to maintain the mold.
The mold surface claddingdetection equipmentis a high-precision instrument, whichincludes high-precision laser ranging sensors, two digital servomotors, encoders, horizontal sliding screws, vertical sliding screws, and calibrationconsoles,controllers and othercomponents. The equipment has many advantages such as high accuracy, strong stability, convenient installation and strong observability. It is suitable formoldsurfacecladdingdetection, surface flatness analysis, surface flaw detection,taper measurement, etc. It is alsosuitable for round billets, square billets, slabs, special-shaped billets, etc., widely used and powerful.
The composition of the system：
1. The mold surface claddingdetection equipmentis equipped with: data processing and display unit, horizontal motion mechanical power output unit, vertical mechanical power output unit, instrument motion control unit, laser measurement sensor, and instrument bracket.
2. Data processing and display unit: used for data acquisition and storage, system equipment control, parameter configuration, height displayof the descent, start and stop control, etc.
3. Horizontal motion mechanical power output unit: the digital servo motor in the horizontal direction controls the sensor to move in the horizontal direction, so that the sensor can scan the horizontal inner cavity wall of the mold copper plate to detect data.
4. Vertical mechanical power output unit: the digital servo motor in the vertical direction controls the sensor to move in the vertical direction, so that the sensor can scan the vertical cavity wall of the mold copper plate to detect data.
5. Instrument motion control unit: It is used to control the motion scanning of the motor, and the running speed, running track, and control mode of the motor can be configured through parameter settings.
6. Laser measurement sensor: The laser displacement sensor adopts the principle of laser triangulation. The laser transmitter shoots the visible infrared laser to the surface of the measured object through the lens, and the laser reflected by the object passes through the receiver lens and is received by the internal line array image processing sensor. According to different distances, the corresponding positions of the light spots received on the line array sensor are also different. According to the angle of this reflection, the distance between the actual objects can be calculated by calculating the distance of the sensor spot.
7. Instrument bracket: The mold surfacecladdingdetection equipmentneed to beplaced directly above the mold when it is in use, and it is required to be fixed firmly without displacement vibration during the measurement process to ensure the measurementaccuracy.
The parameters：
Detectioninstrument service life: ≥5 years;
Detectioninstrument reliability: more than 98%;
Detectionrange: 60~1000mm (customizable)
Detectionaccuracy: 0.01mm
Spot diameter: 1.0x1.5mm (spot scan), 1.0x20mm (line scan)
Falling pace: 1~20mm/step
Single measurement time: less than 2min
Power supply: DC24V
Operating temperature: -20~80℃
Equipment warm-up time: 3~5min
Shock resistance: 50G (X, Y, Z axis)
Vibration resistance: 10Hz~5Hz (amplitude 1.5mm,each 2 hoursinX, Y, Z axis)
Send product request
Other supplier products
 |
LAG-S100 Ladle Slag Detection System (Eddy Current) | LAG-S100Ladle Slag Detection System (Eddy Current) Overview The continuous casting ladle slag detection device is used to detect the slag conte... |
 |
On-line Billet End Continuous Temperature Measurement | ZST-P100 On-line Continuous Temperature Measurement of the Billet End Overview Thesystem aimsat the continuous temperaturedetectionof theproducto... |
 |
Laser Mold Taper Measuring Instrument | MDC-L200 Laser Taper Measuring Instrument (Multi-dimensionalDetection) Overview: Laser taper measuring instrument(multi-dimensional detection) is ... |
 |
SPD-V020 Multifunctional Strand Condition Monitor | SPD-V020Multifunctional Strand Condition Monitor Overview In the production process of the multifunctionalstrandconditionmonitor, in order to e... |
 |
Mould Online Width Adjustment and Taper Measurement | Mould Online Width Adjustment and Taper Measurement Overview In order to meet the needs of producing various specifications ofcontinuously cast... |
Same products
 |
Lifting Beams Adjustable Lifting Beam | Seller: Hebei Connect Trading Co.,Ltd | Structure: I Beam For Lifting type and streamline form. Working Load Limit: 2 Ton to 50 Ton A... |
 |
Replacement of PALL HC8304FAN16H Hydraulic filter element | Seller: Xinxiang Saya Filters Co., Ltd | Product Advantages: 1. Using glass fiber from the American HV brand as the filter layer, the fil... |
 |
Argo V2.1260-06 Hydraulic Filter Replacement | Seller: Xinxiang Saya Filters Co., Ltd | Performance characteristics of Argo V2.1260-06 Hydraulic Filter Replacement: 1. Good filtration p... |
 |
Eaton Internormen Hydraulic Filter Replacement | Seller: Xinxiang Saya Filters Co., Ltd | Product Description： The filter elements have the characteristic on high pressure collapse resis... |
 |
Sullair / Air Filter Replacement | Seller: Xinxiang Saya Filters Co., Ltd | Ayater air filter Introduction： ● Air Filter Element is a critical part of Compressor, made of hi... |
