Analog Heat Source Instrument
Overview:
LGK-S107 analogheat sourceinstrument(heating tool) is independently developed and designed by WuhanCenterRise M&C CO.,. Thisinstrumentis a heating and testing equipment used to test the performance of thecouple installed in themoldincontinuous casting machine. After the installation of the mold breakout forecast couple is completed, theanalogheat sourceinstrument is used to test thesecouplesbeforethey goonline. After the thermocouple is connected to themoldthermocouple detector, the current temperature of each thermocouple point will be displayed. By usingourheating device to heat the copper plate point of each thermocouple at a fixed point, the thermocouple will have a synchronous temperature rise and then we can observe the temperature rise curve of the same column of temperature points to see whether the temperature measurement consistency of the column of couples is consistent, so as to judge the overall status of couples installed in the mold. If an abnormal point occurs, it needs to be repaired and replaced, so as to ensure the stable operation of the mold breakout prediction system.
The working principle:
The heating tool generates high heatby220valternating currentandthe electric heating element. The heat is transmitted to the copper plate of the mold through the copper head to simulate the heat source of molten steel, so that the thermocouplesof the mold can sense the temperature changeto achievethe purpose of calibrating the temperature measurement system.
Thecomposition:
Walking trolley mechanism
Preloader
Pure copper heating contacts
PID thermostat
High power heating tube
high power driver
The parameters:
Power supply: AC220V 50Hz
Total power: 2200W
Single point power: 300W
Temperature control accuracy: 1°C
Temperature control range: 0°C-500°C
Common temperature range: 25°C-300°C
Heating points: 3 (points can be customized)
Heating method: heating tube heating
Heating contactmaterial:copper
Send product request
Other supplier products
 |
Laser Mold Taper Measuring Instrument | MDC-L200 Laser Taper Measuring Instrument (Multi-dimensionalDetection) Overview: Laser taper measuring instrument(multi-dimensional detection) is ... |
 |
Handheld Thermocouple Calibrator | Handheld Thermocouple Calibrator Model: LGK-JS02-064 Overview LGK-JS02-064 handheld thermocouple calibrator is a product independently develop... |
 |
LDC-X200 Laser Diameter Measuring System | LDC-X200 Laser Diameter Measurement System Overview The non-contact diameter measuring system, is mainly used in the measurement of the outer d... |
 |
SPD-V020 Multifunctional Strand Condition Monitor | SPD-V020Multifunctional Strand Condition Monitor Overview In the production process of the multifunctionalstrandconditionmonitor, in order to e... |
 |
Ladle Comprehensive Management System | LDT-N200 Ladle Integrated Management System Overview: In the steelmaking production process, the ladle is the key equipment for holding molten ste... |
Same products
 |
Lifting Beams Adjustable Lifting Beam | Seller: Hebei Connect Trading Co.,Ltd | Structure: I Beam For Lifting type and streamline form. Working Load Limit: 2 Ton to 50 Ton A... |
 |
Replacement of PALL HC8304FAN16H Hydraulic filter element | Seller: Xinxiang Saya Filters Co., Ltd | Product Advantages: 1. Using glass fiber from the American HV brand as the filter layer, the fil... |
 |
Argo V2.1260-06 Hydraulic Filter Replacement | Seller: Xinxiang Saya Filters Co., Ltd | Performance characteristics of Argo V2.1260-06 Hydraulic Filter Replacement: 1. Good filtration p... |
 |
Eaton Internormen Hydraulic Filter Replacement | Seller: Xinxiang Saya Filters Co., Ltd | Product Description： The filter elements have the characteristic on high pressure collapse resis... |
 |
Sullair / Air Filter Replacement | Seller: Xinxiang Saya Filters Co., Ltd | Ayater air filter Introduction： ● Air Filter Element is a critical part of Compressor, made of hi... |
