Rubber sealed bearing TCI tricone bit 5 7/8''
|
BasicalParameter |
|
|
Bit Size |
5 7/8"(149.2MM) |
|
IADC Code |
537 |
|
Connection |
3 1/2"API reg pin |
|
Rotary Speed(rpm) |
110~40 |
|
Weight on Bit(KN/MM) |
|
|
Formation |
Low compressive strength, medium hard formation with hard abrasive interlayer,like Hard shale, anhydrite, soft limestone, sandstone, dolomite with mezzanine, etc. |
1)Cutting StructureThe wear-resisitance of the teethy is enhanced with premium tungsten carbide hardfacing on the tooth surfaces for the steel tooth bit. The durability of premium tngsten carbide inserts is improved with new formulas and new techniques for insert bit.
2)Gauge Structure
Multipe gauge protection with gauge trimmers on the heel of cone, tungsten carbides insert and hardfacing on the shirt tail increases gauge holding capability and bearing life.
3)Bearing structure
High precisiong journal bearing with two thrust faces.Balls lock the cone. Hardfaced head bearing surface. Cone bearing inlaid with friction-reducing alloy and then silver plated. abrasion resistance and seizure resistance of the bearing are improved.
4)Seal and LubricationPremium HNBR O-ting, optimal seal compression and curved seal strcture can enhance seal performance. The pressure compensat or system and adwanced grease can greatly increase the lubricating reliability.
5)Product Application It can receive high WOB in the conwentional drilling. Ti is suitable for various formations by matcing cutting structure with defferent tooth shape, tooth density and tooth exposure height.
Send product request
Other supplier products
 |
9 1/2 inch milled tooth tricone bit for well drilling equipment | BasicalParameter Bit Size 9 1/2"(241.3MM) IADC Code 127 Tooth Type Steel /Milled Tooth B... |
 |
tungsten carbide insert IADC537 rock bit 7 1/2'' tricone bit for drilling | Size of Rock Bit 7 1/2 inch 190mm IADC Code 537 Thread Connection 4 1/2REG Operating Parameters WOB (Weight On Bit) 0.35-1.05 RPM ... |
 |
9 1/2 IADC 537 TCI Tricone Bit for Water Drilling Hard Rock Drill Bit | BasicalParameter Bit Size 9 1/2"(241.MM) IADC Code 537 Connection 6 5/8"API reg pin ... |
 |
IADC537 8 1/2" TCI Tricone Bits for Hard Formation Drilling | BasicalParameter Bit Size 8 1/2"(216.MM) IADC Code 537 Connection 4 1/2"API reg pin ... |
 |
16 inch Steel Teeth or Milled Teeth Tricone Roller Bit for Water Well Drilling | BasicalParameter Bit Size 16 "(406.4MM) IADC Code 127 Tooth Type Steel /Milled Tooth ... |
Same products
 |
YZH stationary hydraulic rock breaker | Seller: Guangxi YZH Machinery Equipment Co.Ltd | As clearly shown in the on-site work images, the YZHstationary hydraulic rock breaker is efficien... |
 |
YZH WHEN1510 Stationary Pedestal Rockbreaker Boom | Seller: Shandong Yirun Foundation Engineering Co., Ltd | Below is a detailed introduction to the YZH WHEN1500 fixed hydraulic demolition arm, covering its... |
 |
YZH WHEN1410 Stationary Pedestal Rockbreaker | Seller: Shandong Yirun Foundation Engineering Co., Ltd | YZH WHEN1410 Stationary Pedestal Rockbreaker is a specialized equipment designed for secondary cr... |
 |
YZH WHEN 1300 Stationary Pedestal Rockbreaker | Seller: Shandong Yirun Foundation Engineering Co., Ltd | The Features of the WHEN 1300 Stationary Pedestal Rockbreaker: Intelligent Multi-Mode Control: S... |
 |
WHE1500 Pedestal Breaker Boom Systems | Seller: Shandong Yirun Foundation Engineering Co., Ltd | The Features of WHE1500 Pedestal Breaker Boom Systems: The WHE1500 Pedestal Breaker Boom System ... |
